Hi
Can someone please provide a link to the service menu IR wav file for above TV
Thanks
Can someone please provide a link to the service menu IR wav file for above TV
Thanks
-
-
Re: LG 55EG960v service menu
I am looking to remove the protection mode on the mainboard -
Re: LG 55EG960v service menu
service menu In_Start or the AZ_ADJ had nothings to do with what you want to do.. so you cant..Comment
-
Re: LG 55EG960v service menu
Look:Comment
-
Re: LG 55EG960v service menu
Is this IR lead correct to use?
https://www.ebay.co.uk/itm/baolongki...-127635-2958-0Comment
-
Comment
-
Re: LG 55EG960v service menu
i cant review. better one user from uk answer you as they most all bought one.Comment
-
Re: LG 55EG960v service menu
i have used an in-start wav file from other site and after input 0413, so the instart menu appears, but it is not possible to change for example Area option or other settings, do you know how to solve this? Also ez-adjust same limits.. thanks
PS: these files are different and them works! thanks..Last edited by Davi.p; 01-06-2023, 07:21 PM.Comment
-
ALL LCD LED TV SERVICE MENU CODES
Service Menu Code with Board Name
China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code...10-31-2024, 03:58 AM -
Hi,
I have JVC LT-32CA120
Board:Vestel 17MB171
I need rotate screen.It is possible in service menu and how to enter service menu?
Thanks. -
I need to open service menu of Dell laptops like image in attachment
Ignore my English
I want beacause i flashed mec5055 using rt809h now it's does not have service tag, but when I install service using F2 in bios setup after save service tag and press disable manufacturing mode using alt+f then battery chagring is permanently disabled. I want to resolve this problem... -
Dear All,
FAFO is the correct definition of what happened with my Samsung UN70RU7100K TV, I was trying to change the region to enable samsung plus using the service mode, entered the mode mute 1 8 2 pwr, and started to dig in. Did some changes while having digital TV signal in the back instead of doing it in HDMI standby mode, I remember changing to a region different then mine but also had a different tuner $%&!. After rebooting the TV, it was all gone, now it shows the splash image and then no image at all. If i disconnect the lan cable from the back, a message is shown in the... -
I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.
I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.
I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.
the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....01-13-2024, 01:57 PM
Comment