dell optiPlex 3000 micro
68SG0Z3 - 8FC8
please unlock bios have 8fc8
service tag : 68SG0Z3...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
DELL POWER EDGE R630 PWB : 38Y6R
hi all my friends . in this backup file it stuck on loading bios drivers. i suspect that it was a bios fault
i required fresh bios dump for
thanks in advance...
-
Case solved by ram reballing you can check video : [url]https://youtu.be/wwOd3o-gSHE?si=bYsYmV9KW3brtRuX[/url]https://Case solved by ram reballing...W3brtRuX[/url]
Leave a comment:
-
Dell precision 7560 la-k621p schematic and boardview need
Device: LAPTOP Brand: DELL
Model: PRECISION 7560
Board: GDB55 LA-K621P
REV: 1.0(A00)
Request: BOARDVIEW and/or SCHEMATIC...
-
Need a2159 128gb nand bin file
I have received SSD nand short A2159 macbook. I received new tsb4226 nand , but i think this is removed from iphone, I have nand programmer , if anyone have nand firmware please send me
Two nand are using :
Tsb4226(128gb)
Tsb4226(128gb)
-
Re: BY-U301 software and usb rom files requested
Hi, I need 820-01949 t2 u4770 rom file , please share working t2 soc rom file
Leave a comment:
-
Re: Please unlock Hp 835 g8 bios password
thanks a lot man...
Leave a comment:
-
Please unlock Hp 835 g8 bios password
I already tried rcunlocker, but not succeed, it have two 32mb bios chip.
Please help me to unlock bios
Thanks In advance
@Vesko356...Last edited by sohail5307; 04-05-2023, 09:47 PM.
-
Dell Inspiron 13 5310 schematic
Model : Dell Inspiron 13 5310 schematic
Motherboard part no. : Moonknight n13 tgl 203009-1
Motherboard image in attachment...
-
Re: 820-00165 no display stuck at 450ma
I check lpc_clk is good 24mhz , I also check all lpc_ad resistor is also good but I am noob at lpc waveform it having a little waveform of lpc then staight line on oscilloscope...Last edited by sohail5307; 03-08-2023, 11:12 PM.
Leave a comment:
-
820-00165 no display stuck at 450ma
I have recieved 820-00165 3 motherboard , it taking about 450ma , but no fluctuations, having plt_rst# , already tried efi reprogrammed, SMC replaced , cpu also change, but still there is no display , missing mem_reset_l signal, .how to confirm its is memory fault or from other?
I check svid signal but there is no waveform only having voltage signal, I also check cpuvr_ready it's good
Help me ...
-
Need bios bin for Fujitsu lifebook a744/h
I upload backup file in attachment...
-
Re: I need how to open this Dell service menu option in dell latitude e6420
Now I think I found some new information
I think need to gnd fwp# for unlock boot info of mec sio
Checkout pdf from attachment...Last edited by sohail5307; 01-13-2023, 09:14 PM.
Leave a comment:
-
I need how to open this Dell service menu option in dell latitude e6420
I need to open service menu of Dell laptops like image in attachment
Ignore my English
I want beacause i flashed mec5055 using rt809h now it's does not have service tag, but when I install service using F2 in bios setup after save service tag and press disable manufacturing mode using alt+f then battery chagring is permanently disabled. I want to resolve this problem...
-
Re: Enabling CSC mode on laptop motherboard
I think he did work on VCC_core section.
For example : The method of NCP6131 to remove the resistance and output the voltage, NCP6121 is also applicable to
the 31-pin VBOOT grounding resistance changed from 10K to 25K-165K, and the core power supply can also be used when the CPU is not installed.
The 27-pin VBOOTA grounding resistance is changed from 10K to 25K-165K. When the CPU is not installed, the integrated display power supply is also provided). Passed the test. The purpose of doing this is to...
Leave a comment:
-
Need boardview/cad for Compal FDI55 LA-J081P Mainboard. Rev: 1.0
Need boardview/cad for Compal FDI55 LA-J081P Mainboard. Rev: 1.0
Leave a comment:
-
-
Re: Need bios repair COMPAQ PRESARLO C700
Try this bios in attachment & also giving response...
Leave a comment:
No activity results to display
Show More
Leave a comment: