Samsung ue49mu6120

[lotas]

OK. I used same procedure for programming, verify was OK, so there is possible, that board has a different failure. But voltages are OK and there is no short at board.
Thank You very much for Your time. Martin

You can once again read this dump that you recorded and post it, I'll take a look.

[Martin_CZ]

OK, I programmed 25Q40 modifyed by You and tried to turn on TV. No reaction.
Then i read a dump (in attachment). Thanks. Martin

[lotas]

OK, I programmed 25Q40 modifyed by You and tried to turn on TV. No reaction.
Then i read a dump (in attachment). Thanks. Martin

Your dump is damaged again, which means you did something wrong with the status register.

[ostap-vip]

Hi, I have the same sympthoms with my TV. The TV does not turn on, but when I disconnect the motherboard from power supply, the backlihgt leds are on. I have read the dump. Can you help me too. TV :
SAMSUNG UE55MU6402UXXH
MOTHERBOARD MODEL: BN41-02568B
CHIP : WINDBON 25Q40CLSIP

[lotas]

Hi, I have the same sympthoms with my TV. The TV does not turn on, but when I disconnect the motherboard from power supply, the backlihgt leds are on. I have read the dump. Can you help me too. TV :
SAMSUNG UE55MU6402UXXH
MOTHERBOARD MODEL: BN41-02568B
CHIP : WINDBON 25Q40CLSIP

Try.

[ostap-vip]

Thank you,it is working !

[lotas]

Thank you,it is working !

Ok!

[crystalsound]

Hi lotas, could you check my dump?
Model UE49MU6400UZXT
BN41-02568B BN94-12400C
IC1604
Read with TL866 and minipro

[lotas]

Hi lotas, could you check my dump?
Model UE49MU6400UZXT
BN41-02568B BN94-12400C
IC1604
Read with TL866 and minipro

Try.

[Lorenzo1967]

Good evening very kind Lotas, I have a UE49MU6120KXZT TV
main: BN94-12570P
BN41-02568A
CY-GM049HGLV1H panel
POWER BN44-00807F
Completely off, disconnecting the mains turns the backlight on regularly.
I read your W25Q40CL but it is completely defective, in fact when reading it it is completely erased, is it possible to restore it somehow?
Thank you for your kind feedback.

[lotas]

Good evening very kind Lotas, I have a UE49MU6120KXZT TV
main: BN94-12570P
BN41-02568A
CY-GM049HGLV1H panel
POWER BN44-00807F
Completely off, disconnecting the mains turns the backlight on regularly.
I read your W25Q40CL but it is completely defective, in fact when reading it it is completely erased, is it possible to restore it somehow?
Thank you for your kind feedback.

Post your original dump here.

[Lorenzo1967]

Post your original dump here.

Good morning Lotas, it's not possible, the memory is faulty, reading it there is nothing.

[lotas]

Good morning Lotas, it's not possible, the memory is faulty, reading it there is nothing.

I need your Dump, without your native dump, I can't help you, all damaged dumps have emptiness at the beginning (FF, FF, FF....).

[Lorenzo1967]

I thank you lotas for your interest, I had some dumps saved and by trying different ones I managed to get it to turn back on.
I was lucky to find the right one.
Thank you very much

[Jimvarela]

Hello, i have samsung UN49MU6300, chasis BN41-02568B ,not power on, i apreciate your help

[SMDFlea]

Hello, i have samsung UN49MU6300, chasis BN41-02568B ,not power on, i apreciate your help

Off topic, the thread is for the ue49mu6120 .Please start your own thread.

[SMDFlea]

Off topic, the thread is for the ue49mu6120 .Please start your own thread.

This thread has gone way off topic, it started as a ue49mu6120 , ive gone back a few pages and theres 5 other different models.

[SMDFlea]

This thread is now closed. Sorry but it has gotten out of control, there are too many requests being made for models which are totally unrelated to the original thread topic.

If you are requesting firmware please post in the eeprom dump thread or start your own thread if you cannot find a related topic.