Putting LCD panel from Vizio TV into another brand TV

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • frannyjunk
    Senior Member
    • Oct 2010
    • 78

    #1

    Putting LCD panel from Vizio TV into another brand TV

    I have a Vizio P502UI-B1 50" tv and baked the main board a little too much (to reflow BGA) resulting in a dead tv. I would like to use the Vizio LCD panel in another tv. Someone in the P502UI-B1 thread said he/she was able to take that Vizio LCD panel and put it into an LG 50UH5530 and it worked. Looking at the Tcon boards from the 2 tv's show different model boards (LG = EAMDJ2S55 while the Vizio tcon = V500DK2-CKS2). I have since looked up tv's that uses the V500DK2-CKS2 Tcon board (Hisense 50H7GB, Vizio P502-B1E & M50-C1, Westinghouse WD50UT4490, and a few others). Does this mean any tv that uses these Tcon boards is compatible with my LCD panel?

    I took pictures of a couple of stickers on the back of the TV. Are any of these model numbers for the LCD panel?
    Attached Files
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: Putting LCD panel from Vizio TV into another brand TV

    If the T-CON Bd connector match, you could give it a try. That is the 12V on the same pins and same amount and placement of gold fingers on the Flat Flexible cable from the Main Bd.

    Comment

    • handsworth
      Senior Member
      • Oct 2015
      • 174
      • United States

      #3
      Re: Putting LCD panel from Vizio TV into another brand TV

      Yes, its possible. I do it all the time where applicable. Have to do a lot of research prior to buying it tho. In addition to the tcon, some tv models like those mentioned above use the exact same screen. I been refurbishing tvs for a long time and keep a list of what tcon and screen came out of what tv. So, I may buy popular tv with a cracked screen but has "expensive boards " and just sit on it til a good screen comes along. Also when switching tcons, you have to make sure the tcon will physically in the tv, even tho they work on the same screen.
      Last edited by handsworth; 07-29-2021, 03:09 PM. Reason: more info

      Comment

      • jjanssen7
        Badcaps Veteran
        • Nov 2012
        • 252
        • Canada

        #4
        Re: Putting LCD panel from Vizio TV into another brand TV

        I do the same as hadsworth above. Sometimes the tcons don't even need to be the same version at all, as long as they are made by the same company. Swap the Tconn with the panel of course. Strangely enough, swapping panels into LG tvs seems to be the hardest... LG mains seem to be very picky about which version of Tcons they'll work with.

        Comment

        Related Topics

        Collapse

        • howardc64
          Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
          by howardc64
          Failure Symptom



          No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

          Where is the short?

          Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



          Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
          05-27-2025, 02:56 PM
        • x_orange90_x
          TCL 50S535 bad tcon or panel issue?
          by x_orange90_x
          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
          03-29-2025, 11:02 PM
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • mmartell
          General Questions on the Relationship Between Mainboard, TCON and Panel
          by mmartell
          My goal here is to be able to use boards on hand to swap into faulty sets when the faulty board is not obvious.

          I will start by asking what is the format of the output from the mainboard and is it generic in any way or does it vary by manufacturer and/or model ?

          And as far as I know a tcon and panel must be a matching pair because the timing of the signals and the voltages required to drive the panel are specific to the panel itself. (That may be a blanket statement that isn't true in some cases where the panel creates its own sub-voltages on its panel boards?)...
          01-06-2024, 01:32 PM
        • Lee M.
          Amazon Fire TV Omni K24NE5 tcon or panel bad?
          by Lee M.
          TV came on with BL on but blank screen. Disconnected one of the ribbon cables from tcon to panel driver board and now I have half of the screen working normally. Any way to tell if the problem is with the tcon or the panel driver board or the panel itself? Should I just replace the tcon and see what happens?
          05-12-2023, 05:47 PM
        • Loading...
        • No more items.
        Working...