I bought this Westinghouse WD55UB4560 4K TV from an individual who don't wanted it fix the original problem it had was no video I check some voltages on the FRC board it wasn't sending voltage to the T-CON board so I replaced the FRC board that's giving this results split video. Any help to resolve will be greatly appreciated.
Westinghouse WD55UB4560 4K TV Now have split video
Collapse
X
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
Did you match the PCB assembly part number as printed on the white barcode sticker?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Comment
-
Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
Guess you could try a firmware update, see if that works.Last edited by nomoresonys; 04-28-2021, 08:34 PM.Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
Can you recheck and make sure of your tv model number on the back cover?Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
What's the version number of tv? should be on back cover near the model number.Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
CV6M50L-A is the blank PCB part number, blank PCB can be stuffed to make many different PCBA'Ss
Shopjimmy: see the notes about matching the version number to the model number.
You can have same TV model with many difference version.
For examples:
https://www.shopjimmy.com/westinghou...w-04531-c050g/
https://www.shopjimmy.com/search.php...y=890-111-6M50
You can try contacting Shopjimmy.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
Yes I think you have a mismatch, check the two frc boards here, the 2nd one down, see how it says match W16028-SY? And you do have that matching sticker number on your original frc board: https://www.ebay.com/sch/i.html?_fro...B4530&_sacat=0Last edited by nomoresonys; 05-02-2021, 05:32 AM.Comment
-
Re: Westinghouse WD55UB4560 4K TV Now have split video
The first two are both a match, the C/N numbers match too but they seem like a pretty steep price for a frc board.Last edited by nomoresonys; 05-02-2021, 05:32 AM.Comment
Related Topics
Collapse
-
by m1ch43lzmHi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
by HakuuHi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
by howardc64All left and right refers to looking from rear of TV (or looking from front with TV upside down)
- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
by Aimbitvideo: https://www.youtube.com/watch?v=S-xBu7m6SwE
Hi all. I was given this JBL Flip Essential speaker that 'fell from about 8 feet' and then the bluetooth would no longer function. It seems to power on normally and responds to button presses, but it will not showup on bluetooth for any device I try to connect to it.
The bluetooth daughter board has a 26mhz oscillator that I could not get to read the proper frequency so I tried replacing that to no avail. Thought maybe something was wrong with the bluetooth IC it's connected to, so I tried replacing that as well. None...10-28-2024, 09:29 PM -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos - Loading...
- No more items.
Comment