Inverter 316827000001-R0A transformers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tips
    Member
    • Feb 2014
    • 15
    • UK
    #1

    Inverter 316827000001-R0A transformers

    I have a failed inverter board, 316827000001-R0A from an Acer Aspire Z5700 AIO PC. (I know I am asking this question under TV's and video sources as I believe it is more relevant here than under PC's and I hope that is not an issue)
    The transformers have failed and I am struggling to identify them or find a suitable replacement for them. The only code printed on them is 273001050372 10252. (Please see attached pictures)

    Any advise or suitable compatible replacements would be most welcome, and thank you in advance.
    Attached Files
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: Inverter 316827000001-R0A transformers

      If you can't find a replacement then maybe something like this could be substituted.
      https://tinyurl.com/y643vuew

      Or contact these people to see if they can help
      http://www.lcdparts.net/Transformer3D.aspx
      Last edited by dick_barton; 12-13-2020, 10:45 AM.
      Willing to help but I'm no expert.

        Comment

        • Tips
          Member
          • Feb 2014
          • 15
          • UK
          #3
          Re: Inverter 316827000001-R0A transformers

          Thank you for your feedback, will look in to both options and hopefully find something that will do the job

            Comment

            Previous template Next

            Related Topics

            Collapse
            • x_orange90_x
              Vizio E55-E1 bad backlights or bad inverter?
              by x_orange90_x
              I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

              I don't know how exactly to test the inverter itself. Is it...
              01-29-2025, 09:24 PM
            • Gentian
              APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger schematic
              by Gentian
              I have a tripp-lite aspint 3636vr inverter charger which blow some of mosfet transistors. I replaced them repaired also the driver circuit and tested but the mosfets burn again.

              It work very well as inverter and also as charger if I let the rear switch in auto mode (inverter) and charger only(charging) but in auto when I connect the feed line 220V AC first time it pass ok to line and start charging the batteries but when I remove the feed line it pass to inverter mode and if I do it again the second time when passing from charging to inverter the Main transformer start making a...
              03-06-2023, 07:07 AM
            • valvashon
              Insignia NS-LCD19-09 (PS OK, Inverter problem?)
              by valvashon
              For some reason I'm just not going to let this 19" TV defeat me. I guess because I have a schematic to work from I feel like I'm oh so close.

              History- while adding a turn-on circuit I let a small screw roll under the power board. Worked through all of that circuitry, probably replacing a MOSFET and PWM controller that were not bad but I was following the service manual. Finally figured out that the power supply is in working order when the inverter section (for the backlights) is disconnected. When the +12 supply to the inverter is disconnected the +12 and +5 will come up...
              1 Photo
              01-04-2024, 01:44 PM
            • eccerr0r
              A modified sine wave inverter + a grid tie inverter?
              by eccerr0r
              If I had a solar fed grid tie inverter (GTI), a modified sine wave inverter, and a power outage occurred, what would happen if you disconnected mains, backfed the modified sinewave inverter (MSI) into house power, and hooked up the GTI to the output of the MSI, would it work?

              Next thing is trying to charge the batteries using solar power, but that's another issue ...
              08-31-2023, 09:14 PM
            • JFarm
              Sharp Aquos LC-46E77UN inverter testing
              by JFarm
              I picked this TV out of a trash pile. When I plug it in I can hear the relay on the power supply “click” almost immediately, and then 7 seconds later there is another “click” and the power/OPC LEDs start to flash: two pulses on the power LED, one on the OPC LED. I didn't notice any sign of life from the backlight, but more on that below.....

              The service manual () says this is a “DET_10V error: UR10V or A9V is not applied”, but after checking several voltages I believe the power unit is tripping off due to an overload as soon as the backlight tries to come on; this kills...
              03-21-2021, 11:10 AM
            • Loading...
            • No more items.
            Working...