Philips 32PFL3605\12 TPM4.1E LA No Power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trunks81
    Badcaps Veteran
    • May 2020
    • 265
    • Nederland

    #1

    Philips 32PFL3605\12 TPM4.1E LA No Power

    Hello

    Ive got an 32 inch where i see some strange things.
    There are no standby lights on the chasis, the blue led on the back of the smps lights up and slowly fades away.
    When board is connected in the tv the 5vsb is 5.3V
    And also the pfc is 386v instead of 400v, There is 12v and 24v only is 25,7v
    Attached Files
  • trunks81
    Badcaps Veteran
    • May 2020
    • 265
    • Nederland

    #2
    Re: Philips 32PFL3605\12 TPM4.1E LA No Power

    i found that an common problem is that U7106 is defective on the M/B !
    only when i measure mine iam getting 3.3V so that should be oke

    Comment

    • trunks81
      Badcaps Veteran
      • May 2020
      • 265
      • Nederland

      #3
      Re: Philips 32PFL3605\12 TPM4.1E LA No Power

      I whas wrong .. tv starts up but there is no backlight

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: Philips 32PFL3605\12 TPM4.1E LA No Power

        What Voltage do you have on at the EN (BL-ON) pin and DIM pin?
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • trunks81
          Badcaps Veteran
          • May 2020
          • 265
          • Nederland

          #5
          Re: Philips 32PFL3605\12 TPM4.1E LA No Power

          Found the problem.. supply needs to be modified in order to work again!
          See solution in the attached files.
          Attached Files

          Comment

          Related Topics

          Collapse

          • G33RT
            Philips 8200 series 65PUS8204/12 stuck at Philips Logo
            by G33RT
            Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

            It does power up when pressing the power button.

            I already try the power button while plugin the plug with no result.
            Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

            Could this be an PSU or eMMC issue ?
            07-19-2025, 03:43 AM
          • Francesc V.
            Christmas lights - Something I am doing wrong
            by Francesc V.
            Hi:

            i am trying to repair this Christmas lights from my parents. They are incandescent lights, no led lights.

            I have tried with 12V a 24V small lights that I found in Aliexpress but is obvious that are not the right ones. They last microseconds connected. Do they blow because of Amps or Volts?

            If I measure the Amps in the string........it's only 90mA. If I measure the Volts in the "green box"......it's between 0 and 190V, but doing a little bit of maths from the number of bulbs in series.......it's only about 6V per lamp.

            Could...
            03-11-2023, 07:38 AM
          • janos6662000
            Philips 47PFS7509/12 LCD TV problem
            by janos6662000
            Hi

            I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
            When i applied cable signal to check image, i had normal picture, but TV was restarting.
            I downloaded original firmware and applied the update, but the problem remained.
            From a colleague i received a "factory package software" which is a lot bigger.
            I made another firmware update, but still did not solve the problem.
            Somewhere on the way the error got worse, because at the moment the...
            08-12-2025, 12:54 PM
          • bialag
            Lenovo ThinkPad E14 Gen 5 - Not Powering On - 3 Blinking Lights - 20 volts 0.224 amps
            by bialag
            Hello,

            I have a Lenovo here that does not want to power on. The motherboard appears to be clean, no sign of corrosion or obvious fried components. When plugged in, I see 3 blinking lights and then off. It would cycle the 3 blinking lights every 10 seconds or so as long as I have the adapter plugged in. Amp meter shows 20 volts, 0.224 amps, no fan spin, red light indicator near the charge port.

            Thermal camera shows a section of the motherboard that is warmer than the rest. It is near the connector labels JRTC1 (CMOS battery). Diode measurement to ground for pin 1 = OL,...
            03-25-2025, 05:56 PM
          • aidanmo
            Philips 43PUS7506/12 - Loud blown out sound
            by aidanmo
            Hello,

            I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
            I thought maybe the speakers got damaged, so I replaced them - no dice.
            • Using the internal speakers, it always happens.
            • Using the headphone jack, it never happens.
            • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
            ...
            02-28-2025, 03:13 PM
          • Loading...
          • No more items.
          Working...