Hello, I'm trying not to scrap the TV for parts, the original issue was that there was no display, backlights came on and audio worked.
As someone kindly shared on the electronica-pt site, that was a panel fault, I did the tape cutoff method on pins 9~13(right to left) of the right side flat. Then some image would start appearing on the right (defective) side, while the left one has no problems.
But this looks terrible, I've also inspected the display and tried touching around the side tabs on the right side, nothing changed, also no shorts or anything weird on the panel boards. The display works until about 70% horizontally then it fades to black on this yellow/red shade, there is also image retention on it.
This TV is the cheapest crap sold around here, no wonders it lasted 2 and a half years at best.
As someone kindly shared on the electronica-pt site, that was a panel fault, I did the tape cutoff method on pins 9~13(right to left) of the right side flat. Then some image would start appearing on the right (defective) side, while the left one has no problems.
But this looks terrible, I've also inspected the display and tried touching around the side tabs on the right side, nothing changed, also no shorts or anything weird on the panel boards. The display works until about 70% horizontally then it fades to black on this yellow/red shade, there is also image retention on it.
This TV is the cheapest crap sold around here, no wonders it lasted 2 and a half years at best.
Comment