IGBT data

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • andyb1712
    Member
    • Oct 2018
    • 41
    • United Kingdom
    #1

    IGBT data

    I need some data on a IGBT device 2PG043 but so far not been able to find anything online.

    Does anyone have any info on this device?

    I think the TO220 version of the DG302 will replace it but without any specification it is hard to say for sure.
    Tags: None
    • R_J
      Badcaps Legend
      • Jun 2012
      • 9535
      • Canada
      #2
      Re: IGBT data

      The only datasheets I can find are for the 2PG009 and the 2PG011
      Attached Files
      Last edited by R_J; 07-02-2019, 02:23 PM.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • welcometoo
          acer nitro 5 AN515-55 no display / caps lock
          by welcometoo
          Hi brothers, please i need help diagnose acer nitro 5 no display issue.

          model: nitro 5 an515-55
          motherboard part number: GH51M LA-K862P Rev: 1A

          i received this laptop with a short in power line, it was a capacitor + a mosfet on VCORE line , the laptop turned on cpu and gpu getting warm all voltages seem ok except vcc_gt but no display/caps lock activity also no hdmi out.
          i flashed new bios also ec(ene kb9022) the same result .
          disabled discrete graphics (rtx 3060 ) by cutting its power and shifting a resisror near pch VCC_GT comes but still the same...
          4 Photos
          07-05-2025, 11:11 AM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • kingiii
          Possbility of data recovery, is it true?
          by kingiii
          Hello, A customer told us that there is a data recovery company that can by pass IMac pro 2020 with t2 chipset GPU to get their data back, I am wondering if that is possible. GPU is shorted and Imac wont boot at all. I informed customers that data are almost impossible to be retrived, and they are upset and think we are BS them. Of course being up in Canada, people like to believe that usa will have a better solution for it, a US data recovery company they searched on google told customer that they could get the data back without needing worry about T2 chip or Imac not working all that, I do not...
          07-02-2025, 02:29 PM
        • mscottdoran@gmail.com
          Can anyone identify the classification of this data signal?
          by mscottdoran@gmail.com
          Hi, I'm an elevator technician. The attached oscilloscope display picture is from a digital elevator hall arrival lantern data signal. We have been having problems with “ghost signals” causing intermittent hall arrival lanterns to illuminate randomly when the elevator is not actually due to arrive at the floor.

          The tech support of the hall arrival board manufacturer (CE Electronics) is blaming the elevator controller manufacturer (MCE), and the tech support of the elevator controller blames the hall arrival board manufacturer.

          The boards are powered by a ground referenced...
          https://www.ceelectronics.com
          02-08-2025, 11:31 AM
        • Joe24
          Maytag Whirlpool Kenmore clothes dryer data bus
          by Joe24
          Patient is a Maytag/Whirlpool/Kenmore clothes dryer. Not sure of exact model, doesn't matter. All boards are out of production.

          Specific problem is a Maytag 8544799 / WP8544799 motor-control board, aka Diehl Controls 708879-05. Customer states the board "doesn't work, motor doesn't run". Not sure how the repairman made that assessment, or if it's even accurate. He can't get replacement boards, and the owner decided to buy a new dryer, so whether this board is the problem is speculation on his part. Again, doesn't matter.

          I've been over the board looking for...
          01-13-2025, 06:50 PM
        • Loading...
        • No more items.
        Working...