Seller beware. Savanal aka CRADEAL

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • syaoran123
    Senior Member
    • Jun 2014
    • 178
    • Australia

    #1

    Seller beware. Savanal aka CRADEAL

    Just wanted you guys to know there's a seller by the name of "savanal" trading on marketplace website bonanza.com where I bought a buffer board from. The prices look reasonable and the seller's ratings make him look reputable, but don't be fooled.

    After finding out that the item I received was defective, I tried to message him for a refund. While he was responsive, he talked a load of rubbish. And when I checked the PayPal record, I found out it's the same guy trading on cradeal.com, which some of you already know sell dodgy parts. If you haven't already, see for yourself in the images attached.
    Attached Files
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12076
    • U.S.

    #2
    Re: Seller beware. Savanal aka CRADEAL

    Ebay can be hit or miss but I like the buyer protection, I think it makes sellers not try to sell so much junk, they know it's coming back if they do.

    Comment

    • syaoran123
      Senior Member
      • Jun 2014
      • 178
      • Australia

      #3
      Re: Seller beware. Savanal aka CRADEAL

      Originally posted by nomoresonys
      Ebay can be hit or miss but I like the buyer protection, I think it makes sellers not try to sell so much junk, they know it's coming back if they do.
      I have been selling on ebay too and some buyers give me a hard time. My policy is that I only sell 100% working stock and no refunds given if it does not fix their TV. This is for quality assurance as we are unable to test returned stock and unable to resell it again. I do occasionally get customers filing a claim against me for an 'item not as described' but actually it's because they ordered the wrong part and failed to ask questions before buying. Ebay has no interest in these kinds of disputes and will always favour the buyer. No seller protection whatsoever.

      Greedbay should use the fees we pay to cover both parties like an insurance claim if they cannot prove who is at fault.

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12076
        • U.S.

        #4
        Re: Seller beware. Savanal aka CRADEAL

        I had similar ordeal, a tv shop bought a board from me, I had every tiny detail in description, then he says it don't work. Knew the board was good, after getting his tv details, he was trying to put a 55 inch board in a 42 inch tv, being it was a tv shop that bought it, I didn't think they would make that mistake. I refunded his money less shipping, damn if I'm going to eat shipping on a goofup like that. Lesson learned, confirm fit then confirm it again.

        Comment

        Related Topics

        Collapse

        • eccerr0r
          Sell or Shim Solar panels?
          by eccerr0r
          Well, due to my grid tie inverter not accepting high voltages, and the fact that the lions in my solar panels are 36V (72-cell) I think I need to stick with 72-cell.

          However I have a few smaller panels that are 36, 32, and two 30-cell. The 36 and 32 together run at 75% efficiency (and subtract more with additional inefficiencies) when running in parallel with the 72-cell panels. The kicker is that the two 30s... generate 0% power when connected in parallel(!)

          So now what to do with these small panels?

          I could sell them...

          Or I could shim them....
          03-29-2025, 01:07 AM
        • sam_sam_sam
          They are closeing there doors for good when they sell out for inventory mpja.com/ sad to see them go
          by sam_sam_sam
          I have bought from them for many many years now

          https://www.mpja.com/...
          04-22-2025, 02:57 AM
        • re-atari
          Anycubic Photon 5.5 3D printer 25Q32 flashrom dump needed
          by re-atari
          Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.

          Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
          02-03-2025, 06:49 PM
        • Sudoer
          DIYPHONE Store and AIXUN T420D
          by Sudoer
          I've seen enough reviews of AIXUN T420D on YouTube and decided to try it. One handle defective from the inside, ruined 3 JBC tips, just destroyed the plastic on the tips. One stand does not work, the soldering handle not drop the temperature. Because the seller refused to return the money, and AliExpress supported him and even PayPal did not help, I can disassemble this piece of shit and see what inside, if anyone is interested. The seller said that the station does not work with JBC handles, but I checked that it works. It's just a pity to connect the original handle to this shit. Beware of order...
          05-04-2023, 04:55 AM
        • valvashon
          Toshiba EM131A5C-BS microwave oven- noisy EE16 2.7 mH inductor
          by valvashon
          This poor microwave oven was purchased by my former employer in 2019 (it's a 7/2018 build) and lasted for about 3 months before making a terrible noise when in use. I determined that it was the main transformer and contacted Toshiba. They asked for a picture of the cord cut in half and the serial number, and then credited my boss' credit card. Rather than sending it to the e-waste, I bought a transformer on eBay and thought I'd try flipping it. Discovered that used microwave ovens aren't worth much but in for a penny, in for a pound as they say. It sat in my basement getting kicked and shoved...
          02-20-2024, 10:38 AM
        • Loading...
        • No more items.
        Working...