Optoma EH1020 broken cable connector

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • subspace
    New Member
    • Dec 2018
    • 6
    • UK
    #1

    Optoma EH1020 broken cable connector

    Hi I am trying to repair an Optoma EH1020 projector.

    There is a flat ribbon cable that connects the control panel on the top panel to the mainboard but someone has damaged the connector on the mainboard I assume by removing the panel without disconnecting the cable. The retaining clip is missing.

    Does anyone know what type of connector this is? If I can find the same part can I replace the retaining clip?




    Thanks James.
    Attached Files
    Tags: None
    • bman4
      Badcaps Veteran
      • Jul 2015
      • 210
      • canada
      #2
      Re: Optoma EH1020 broken cable connector

      Look up Zif connectors

        Comment

        • R_J
          Badcaps Legend
          • Jun 2012
          • 9515
          • Canada
          #3
          Re: Optoma EH1020 broken cable connector

          This might be it? You will need to measure the pin pitch to get the correct one Or search for FFC/FPC Connectors

          http://www.cwe.com.tw/product_classi...mpany_SN=19660
          Attached Files
          Last edited by R_J; 12-18-2018, 10:41 AM.

            Comment

            • subspace
              New Member
              • Dec 2018
              • 6
              • UK
              #4
              Re: Optoma EH1020 broken cable connector

              Ok thanks.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • Thermaltake
                  Panasonic NV-V8000 cable
                  by Thermaltake
                  Hi to all. I was wondering if anyone here got some parts for NV-V8000 vcr maybe. I am searching the whole internet and just can't find any parts for the old tank

                  I got two cables broken on the connector side, one has broken small plastic part that I assume from factory because I was the first one to open it, and it look like that, don't make some difference in work except aesthetic. But other connector on wire got broken wire off the connector.Connector was in very bad condition just like the whole vcr I restore all other parts only that connector got weak plastic duo to nicotine...
                  01-18-2025, 05:28 PM
                • emeskay
                  Lenovo Yoga 710 15ISK, 80U00002US battery cable wire broken.
                  by emeskay
                  We have an Lenovo Yoga 710 15ISK that we use as a secondary laptop. To cut a long story short, around May 2023, while traveling, I connected the laptop into an electrical outlet that was already switched on. Something made a "pfft" sound and the laptop refused to turn on after that. After getting back home, I gave the the laptop for repair to an informal repair person. He replaced the adapter and an internal motherboard part, but after he returned it I noticed that the LCD did not look normal. Essentially, every alternate horizontal line on the screen had gone missing. The laptop was...
                  1 Photo
                  08-06-2024, 07:13 AM
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • Patch2
                  Cable Repair
                  by Patch2
                  I have a broken connector (believe it's a 6 pin mini-DIN) on a cable. The metal shroud and all but one of the pins are separated from the cable, and just stuck together for the photo. The other end is an unknown rectangular connector. The cable is for the foot pedals on an Italian made electronic piano, and the company is out of business. Looking for ideas on how to fix it. I have a soldering iron, but I'm not very skilled at soldering, so getting a retrofit for the broken end may be beyond my ability. The other end would be easier to replace, if I could get a mini-DIN cable with the same number...
                  8 Photos
                  01-02-2025, 06:04 PM
                • Loading...
                • No more items.
                Working...