Just need some verification, I think..
Like in this video (skip to 1:30) I tested for 5V on pins 1 & 2.
With the harness connected I get numbers bouncing all over (between 0-1.9v).
With the harness removed I get 5v steady.
Does this still mean it is the PS?
Like in this video (skip to 1:30) I tested for 5V on pins 1 & 2.
With the harness connected I get numbers bouncing all over (between 0-1.9v).
With the harness removed I get 5v steady.
Does this still mean it is the PS?
Comment