So I got this TV in with a flashing back light immediately took the TV in disassembled it down to the backlighting system. Found 5 burned out in various places. These appear to be a 5 V LED with a bucket style diffuser lens. Unfortunately I do not have any of these in 5v. Anyone have any ideas where to find these single LEDS?
LG 55LB5600 LED voltage
Collapse
X
-
LG 55LB5600 LED voltage
Tags: None -
-
Re: LG 55LB5600 LED voltage
Some more pics. Oddly the LED is about the same size as the 3v ones LG makes.
Sorry I meant 6v, not 5v. These appear to be 6v. Can I just the in 2 3v piggyback? I know this is dumb but it's for someone who lost everything and just needs a tv not caring on bright spots on the screen.Last edited by freakaftr8; 03-11-2018, 03:02 AM.Did I leave the soldering iron on?Comment
-
Re: LG 55LB5600 LED voltage
ive got some of those in 6v but i ordered them from ali express not sure how long stuff takes to get to the usa
https://www.aliexpress.com/item/50pc...828702089.htmlComment
-
Re: LG 55LB5600 LED voltage
"Can I just the in 2 3v piggyback? "
??? You want to put 3v ones and ruin a giant 55inches? It's out of logic.
LG produces tv with 2 types of 6v leds, you better search the web shops for your precise model, if there is a sheet of led data then you start from there to search on the various web markets, i found mines on aliexpress.
---bought from ebay:
50PCS LED Backligh 2W 6V 3535 Cool white LCD Backlight for LG LED TVs
Product description
Forward Current (IF ): 500mA
Pulse Forward Curren t1 (IFp): 800mA
Reverse Current (IR): 50mA
Reverse Voltage (VR): V (mA)
Power Dissipation (PD): 2W
Operatin Tgemperature (Topr): -40 - +85 °C
Storage Temperature (Tstg): -40 - +100 °C
Soldering Temperature (Tsld): Reflow Soldering:260 °C
for 10secs
Hand Soldering:350 °C
for 3secs
Junctio Tnemperature (Tj ): 162°C
Forward Voltage (VF): 6.0-6.8V (250mA)
Luminous Flux (LM): 150lm (250mA)
Luminous Intensity ( IV ) : cd (250mA)
Wavelength (nm) : -nm mA
CIE : x=0.255 y=0.223 (250mA)
Color Correlated Temperature (CCT):
CRI :
Viewing angle : 120°
Lead Frame Type LED Package: 3.5x3.5x0.65 mm LxWxH d=mm
---bought from Aliexpress:
50pcs LED 3535 3537 Light Beads Cool white High Power 1.2W 6V 97.7LM For SHARP Original LED LCD TV Backlight Application
MODEL NAME : GM5F20BH20A
Manufacturer : SHARP
Power Dissipation (PD): 1.2W
Forward Voltage (VF): 6V
Luminous Flux (LM): 97.7LM
Color Correlated Temperature (CCT): Cool white
Lead Frame Type LED Package: 3.7x3.5x0.8 mm LxWxH d=2.58mm
https://it.aliexpress.com/item/SHARP...796564458.htmlComment
Related Topics
Collapse
-
by rddubeHello friends,
Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.
I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I... -
i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .
VCCIO voltage ok
VCCSA Voltage OK
VCCPLL Voltage OK
Ram Voltage ok
RamVTT OK
VPP 2.5 OK
But No Core Voltage
and i want to this vrm ic datasheet or pinout (ISL69269)
anyone have this ic pinout voltages?...06-25-2025, 07:19 AM -
by electron_jjHi Everyone, I am new to this forum. I have a Panasonic LED TV which doesnt turn on and is blinking 4 times repeatedly when I turn on the switch. The TV does not respond to the remote control so I had to turn on using the physical switch on the side of the TV. When I turn on the switch the 4 x blinking starts and repeat itself until I turn off the TV. There is a black screen. I turned off the light in the room to check the panel and I think there is no backlight as far as I can tell.
I have been inspecting and testing the capacitors and diodes in the power supply board to try to... -
by sam_sam_samI found two capacitors on the board and one of the leads on one capacitor had bad soldering joint and the other joint connections not much better and there were several soldering joints that way to much flux around the joint redid several of them
The capacitors were a non brand that I did not recognize they got replaced and now it does not oscillating between relay but what concerns me a little bit is when the voltage is a little bit low the output voltage is around 130 volts and then drops down to 115 volts this happens around 105 to 108 volts if remember correctly
Now... -
3+1 Voltage Regulator for IMVP-7/VR12 CPUs
Compliant with IMVP-7/VR12, the ISL95831 provides a complete solution for microprocessor and graphic processor
core power supply. It provides two Voltage Regulators (VRs) with three integrated gate drivers. The first VR can be
configured as 3-, 2- or 1-phase VR while the second output is 1- phase VR, providing maximum flexibility. The two VRs share the
serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with the two chip approach.
Based on Intersil's Robust Ripple Regulator...-
Channel: Common Parts Library - Datasheets
11-05-2024, 03:24 PM -
- Loading...
- No more items.
Comment