I have a Philips plasma I'm trying to fix. I have the back off and have checked all the fuses and they are good. I don't see any bulging capacitors or any burned areas. The blue light comes on and I hear the clicking sound from the speakers but screen is black. I can unplug each sustain board but when I plug them back in they both give off a spark. It happens when the unit is unplugged and it has happened when its been unplugged for several days. I am not sure where to go from here and could use some insight on what to do next.
An additional note - the set has never been used it has been setting under a patio area outside for years in the box. No real signs of the weather affecting it and the box was not rained on just sat in the sun.
An additional note - the set has never been used it has been setting under a patio area outside for years in the box. No real signs of the weather affecting it and the box was not rained on just sat in the sun.
Comment