Philips 46PFL3208H/12 broken HDMI sockets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dicky96
    Sun Seeker
    • Mar 2017
    • 1825
    • Spain

    #1

    Philips 46PFL3208H/12 broken HDMI sockets

    Hi guys
    I have this Philips TV here, it's working but both HDMI sockets are broken

    The vertical mounted one I don't have a suitable socket to replace it with

    However the horizontal mounted one I do have a similar socket I salvaged from a scrap board

    I also desoldered the broken socket without too much drama. The possible replacement I have fits to the board OK but is slightly lower profile than the broken one. However I could persuade it to fit the backing plate with a little bit of work on my dremmel

    The only concern I have is the possibility the two HDMI sockets have the odd and even rows of pins the opposite way round. Does anyone know if this is a standard thing and all sockets are the same in this respect?

    It's not easy to check with my DMM as the old one is badly broken as well as the pin pitch being tiny!

    Alternatively, where could I get the correct type socket? All the ones on ebay say for PS4 as though that is the only device that could ever have a broken socket. Maybe gamers are cack handed

    Pics - the one on the left is the broken one.
    Attached Files
    Last edited by dicky96; 09-19-2017, 04:51 AM.
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
  • attainteddragon
    Badcaps Veteran
    • Apr 2013
    • 764
    • australia

    #2
    Re: Philips 46PFL3208H/12 broken HDMI sockets

    http://pinouts.ru/Video/hdmi_pinout.shtml

    looks like you have hdmi A, you should be all good as far as i can see.

    both ps and xbox have issues with the hdmi connections. pita!
    WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

    Comment

    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England

      #3
      Re: Philips 46PFL3208H/12 broken HDMI sockets

      For that sort of stuff I go to Aliexpress.

      Comment

      • dicky96
        Sun Seeker
        • Mar 2017
        • 1825
        • Spain

        #4
        Re: Philips 46PFL3208H/12 broken HDMI sockets

        What a bitch that was to replace and resolder by hand! But it's done and working

        Rich
        Follow me on YouTube
        ------------------
        Learn Electronics Repair
        https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

        Comment

        • attainteddragon
          Badcaps Veteran
          • Apr 2013
          • 764
          • australia

          #5
          Re: Philips 46PFL3208H/12 broken HDMI sockets

          awesome. not fun to do though.
          WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

          Comment

          Related Topics

          Collapse

          • Wittie
            Philips 55OLED803/12 HDMI ports "half" defective
            by Wittie
            Hello everyone, Please excuse my poor English, but I'm using Google Translate ^^ I'm having a problem with the HDMI and USB ports on my 55OLED803/12. It's no longer possible to connect an HDMI device and see the picture. No matter which port I use, it only recognizes the device as an input source and displays it in the list (BD player, Fire TV, etc.). However, the actual picture doesn't appear in the same state. My home theater system also runs via the BD player - it still receives a signal and plays the sound correctly (e.g., from the TV program or an app like Netflix). This works with both HDMI...
            03-19-2025, 09:38 AM
          • aliougm
            Marantz SR4003 AVR HDMI board issue, seeking for help
            by aliougm
            I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

            Connection as below:
            Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
            If I bypassed AVR then HDTV screen color be good.

            I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
            3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

            I replaced all...
            04-30-2022, 12:21 PM
          • japlytic
            Certain DisplayPort-HDMI cables can disable HDMI CEC communication
            by japlytic
            With a setup including a TV and AV receiver where HDMI Consumer Electronics Control (CEC) and Audio Return Channel (ARC) functions were working, these two functions stopped working after changing some connections (not the one between the AV receiver and TV), so I believed it was a corrupt setting in the AV receiver or TV, but when I disconnected a passive DisplayPort-HDMI cable (which a Multimode DisplayPort connector supports HDMI with a low cost passive cable or adaptor) connected to a home theatre PC, HDMI CEC and ARC functionality was restored.
            An examination of the HDMI CEC wiring...
            07-10-2022, 09:48 PM
          • spleenharvester
            Toshiba 50UL2063DB randomly rebooting with HDMI-CEC and/or HDMI-ARC enabled
            by spleenharvester
            I have this TV hooked up to only an AppleTV 4K and a Creative soundbar. Originally HDMI-CEC and HDMI-ARC wouldn't work at all, I replaced all the HDMI cables with decent UGREEN cables meeting the latest standards, now it all works perfectly but once or twice a day the TV itself reboots while watching a program, the AppleTV keeps running. I haven't fully pinned down whether it is ARC or CEC causing it yet. All are running latest firmware.

            I assume it is just HDMI-CEC being buggy as usual on a shitty Vestel machine, but can anyone think of anything I can try before disabling it?
            03-12-2025, 03:42 PM
          • RossMoodley1967
            LG LCD TV HDMI PORT FAULTY
            by RossMoodley1967
            LG LCD TV picture comes on intermittenly using hdmi port.The sound is on permantly.The hdmi ports looks fine and soldered in securely.The 3.4v coming to the main board is not present(not sure if will affect the hdmi port or where that voltage goes.)The hdmi cable is fine because it works on another tv.The ceramic caps connected to the hdmi controller ic is reading 39 ohms.Could the hdmi controller ic be faulty(feels very warm to touch).The RCA jacks work normally .Thank you in advance for your assistance..
            02-28-2024, 08:38 AM
          • Loading...
          • No more items.
          Working...