Re: Samsung inverse picture
Have you tested the 12v to the tcon? How you've received new tcon the same day you posted here ?
Have you tested the 12v to the tcon? How you've received new tcon the same day you posted here ?
-
-
Re: Samsung inverse picture
Sir its as19 problemComment
-
Re: Samsung inverse picture
A replacement T con board solved the problem. My what a wonderful picture it now has. Totally worth the hassle if fixing it.Comment
-
Re: Samsung inverse picture
thanks for the follow up. enjoy.WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?Comment
-
Re: Samsung inverse picture
We have people in the UK who offer a repair service on ebay maybe worth a look if you cant do it your selfComment
-
Re: Samsung inverse picture
Yo!! Your pictures could have been my pictures!! I had the exact same TV, same problem. Bought a new T-con board after following along on this thread, and BAM my TV looks new. Just wanted to post a thank you for putting this out there in the world. Instead of paying $25 to recycle my TV, I got it working like new for $40!
But if you didn't post the pictures, do the tests, and follow up to say it worked, I would be flying blind. Thanks to everyone who helped on the thread! You people rock.Comment
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
Comment