Announcement

Collapse
No announcement yet.

Replaced leds now see all of them

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Replaced leds now see all of them

    I have an lg 55 inch I replaced 19 out of 55 leds put the set back together and now I see all the leds when the picture has a low light level, what could I have done wrong? Keeper all the screens in order I thought. Please I'm at a list now

    #2
    Re: Replaced leds now see all of them

    Dam typos lost

    Comment


      #3
      Re: Replaced leds now see all of them

      Do they change when you change backlight level? Confused about description of problem.
      Last edited by dskall; 09-01-2017, 04:47 PM.
      I assume no responsibility for any stupid suggestions I might post.

      Comment


        #4
        Re: Replaced leds now see all of them

        Since you say you see all the leds and not just the ones you replaced then the filters must be put back in the wrong order. I'm sure we've all done it at some time.
        Willing to help but I'm no expert.

        Comment


          #5
          Re: Replaced leds now see all of them

          Changing backlight level is the same, have tried changing all the lens around also, I'm pretty sure I keep them in order when I put the set back together

          Comment


            #6
            Re: Replaced leds now see all of them

            Maybe some pictures of the problem
            I assume no responsibility for any stupid suggestions I might post.

            Comment


              #7
              Re: Replaced leds now see all of them

              i have had the same problem, on a O LED LG, i now get an halo around the ones i changed, so tried moving the lens as the LEDs i used where a smaller size to the original and did'nt fit dead center of the lens,
              i did manage to get a few sorted, but it took bloody hours, and i have given up for the time being,
              it a long process move a bit, drop the screen, test, move a bit more, and so on.

              Comment


                #8
                Re: Replaced leds now see all of them

                I'll try moving the lens, but I see the ones that were not changed

                Comment


                  #9
                  Re: Replaced leds now see all of them

                  R u shure you used the same leds ? They may be burning hotter than the originals.

                  Comment


                    #10
                    Re: Replaced leds now see all of them

                    sounds like the old and new leds simply had different output beams.

                    leds are sold with an output beam that is rated in degree's.
                    too little and you get dark spaces between them, too much and the beams overlap.

                    Comment


                      #11
                      Re: Replaced leds now see all of them

                      You see all the leds evenly or just the ones you replaced or other ?

                      Comment


                        #12
                        Re: Replaced leds now see all of them

                        I replace lens on leds while they are lit. Looking straight down you don't want any bright spots
                        I assume no responsibility for any stupid suggestions I might post.

                        Comment

                        Working...