sharp lc-50lb371 u

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • robert phelps
    Senior Member
    • Dec 2016
    • 94
    • usa

    #1

    sharp lc-50lb371 u

    i have this sharp smart tv. in my shop i can get it to connect to my wifi. bring it in the house to my daughthers room and it shows the wifi networks but want connect. the routher is only about 3 feet from the set thu a wall. set has been hanging up a lot, remote will only tab side ways sometimes , have changed the logic board and both do the same. tv 200 feet away will find wifi and log on 3 feet away sees wifi but does not connect help please
  • robert phelps
    Senior Member
    • Dec 2016
    • 94
    • usa

    #2
    Re: sharp lc-50lb371 u

    has also had problem of reebooting over and over

    Comment

    Related Topics

    Collapse

    • KYBOSH
      Trying to Save - Samsung 65" The Frame (QN65LS03B) with no signs of life (One Connect Box)
      by KYBOSH
      I picked this one up today.
      Previous owner says no signs of life.
      TV looks immaculate and its a 2022 model year so I thought maybe the one connect cable was damaged.
      Got it home and put it on the Kill-A-Watt power meter and it was completely dead.

      The TV model is QN65LS03BAFXZA - version: CB06
      The One Connect Box BN44-01066D / BN96-54788Q / BN39-02470A.

      I immediately remembered EazyBone's Samsung The Frame TV no power....One Connect thread and am preparing myself to tear the One Connect open and hunt for dead parts.

      Will keep you all...
      04-05-2025, 08:32 PM
    • An-klamm
      Samsung 55HU8590 UE55HU8590 maybe one connect box ocb
      by An-klamm
      Hello!

      I have a TV that I can't get any further with.
      It is a Samsung UE 55HU8590 with one connect box.
      When I turn on the TV without the one connect box, the animation on the TV tells me to connect the ocb.
      As soon as I connect it, the TV restarts (panel goes dark) and the TV tries to start continuously (relay on the SMPS clicks about every 3 seconds).
      Since the TV works without ocb, I assume that it can't be the PSU?!
      I have measured all contacts of the one connect cable against GND on the ocb board and there is no short circuit anywhere.
      Is there...
      12-04-2023, 01:35 AM
    • EazyBone
      Samsung The Frame TV no power indicator issues diagnosing the one connect box
      by EazyBone
      I got a qn65ls03ta from someone who stated shows no power at all. They said they bought a fully new tv (same one) and tested the one connect box from the old one onto the new one and said it worked.

      I have no reason not to believe them, so I crack open the TV and test for voltages on the main board. There are none. I can't get any voltage at all. (Power comes from one connect to Main board then sends power to additional power board for backlights I believe)

      While doing some digging I found the connection to the one connect cable ON the main board seems to be missing small...
      07-28-2024, 04:46 PM
    • AlexVG
      SAMSUNG UE65HU8500 ONE CONNECT pinout connector request
      by AlexVG
      Hi,
      I came across with
      SAMSUNG UE65HU8500
      ONE CONNECT BN41-02135
      Chassis GOLF_UHD_1MP_JACK

      TV can not recognise ONE CONNECT box, so I need to know the pinout of the CN 3301 connector.
      Moreover, on the main is written A5V. However, cable connected this pin to the GND.






      Maybe somebody have an experience with the same issues?
      I need your help.
      Thank you....
      06-08-2025, 06:49 AM
    • sefoster
      Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
      by sefoster
      I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
      11-20-2022, 09:29 AM
    • Loading...
    • No more items.
    Working...