Help ! Blaupunkt 32/147i

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smallprint
    Senior Member
    • Nov 2010
    • 86
    • UK

    #1

    Help ! Blaupunkt 32/147i

    Hi could anyone shed any light on this blaupunkt 32/147i-gb-5b-hbkup-uk set i have aquired. Basically the guy i got it off had a blackscreen with sound fault and he's read on the internet about a fault with the ic and proceeded to to try and flash the firmware to try and fix it himself and it hasn't worked for obvious reasons being the mainboard had 3 blown caps one bulged and popped (33uf 200v) and 2 leakers at (100uf 63v) which since i have had the set i have replaced and now the screen lights up ok. The problem i have now is the flash he's done has turned the picture upside down and the only .bin i can find which is probably the one he's used is for the wrong model 32/147i-gb-5b-hcdup-uk. The model he had which i now have and i'm trying to resolve is a 32/147i--gb-5b-hbkup-uk and i can't find a firmware file for this model anywhere do any of you guys know where i might find the correct .bin file for it or am i gonna have to replace either the ic chip or whole mainboard ? thanks in advance.
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #2
    Re: Help ! Blaupunkt 32/147i

    if you cant find a bin file maybe use
    http://www.ohmsupplies.co.uk/E2P180-...M-TPMSD309BP85

    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #3
      Re: Help ! Blaupunkt 32/147i

      Have you tried going into service menu for options
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • smallprint
        Senior Member
        • Nov 2010
        • 86
        • UK

        #4
        Re: Help ! Blaupunkt 32/147i

        Originally posted by vinceroger69
        if you cant find a bin file maybe use
        http://www.ohmsupplies.co.uk/E2P180-...M-TPMSD309BP85
        I've found a board at uktv parts for same sort of dough mate just incase i need to but if i can get hold of the correct firmware then that would be a bonus like.I mean the tv itself only stands me at a fiver so far for the price of the caps i've had to replace it would be shame to have gone to that trouble to have to replace the whole board just because of lousy firmware lol

        Comment

        • smallprint
          Senior Member
          • Nov 2010
          • 86
          • UK

          #5
          Re: Help ! Blaupunkt 32/147i

          Originally posted by dskall
          Have you tried going into service menu for options
          It's not the smart tv version dskall you can only update the firmware through usb

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Re: Help ! Blaupunkt 32/147i

            Originally posted by smallprint
            I've found a board at uktv parts for same sort of dough mate just incase i need to but if i can get hold of the correct firmware then that would be a bonus like.I mean the tv itself only stands me at a fiver so far for the price of the caps i've had to replace it would be shame to have gone to that trouble to have to replace the whole board just because of lousy firmware lol
            Just make sure if you buy a secondhand mainboard that it matches the lcd panel number that is used in your tv as if it doesnt you may have the same issue

            Comment

            • smallprint
              Senior Member
              • Nov 2010
              • 86
              • UK

              #7
              Re: Help ! Blaupunkt 32/147i

              Originally posted by vinceroger69
              Just make sure if you buy a secondhand mainboard that it matches the lcd panel number that is used in your tv as if it doesnt you may have the same issue
              Yeah there are 3 or 4 variants of the same board they're also used in technika, logik and bush besides blaupunkt and all are TP.MSD309.BP85 boards.

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #8
                Re: Help ! Blaupunkt 32/147i

                did you see this page this is the downloaded file
                Please note i have not unzipped the rar too see whats inside
                https://translate.google.co.uk/trans...cf5875f09adf2d
                Attached Files

                Comment

                • dskall
                  Badcaps Legend
                  • Oct 2016
                  • 2905
                  • usa

                  #9
                  Re: Help ! Blaupunkt 32/147i

                  I'm saying options to flip image
                  I assume no responsibility for any stupid suggestions I might post.

                  Comment

                  • HAA
                    New Member
                    • Dec 2018
                    • 2
                    • france

                    #10
                    Re: Help ! Blaupunkt 32/147i

                    Hello All
                    I am looking for Eeprom dump for Blaupunkt TV model: 32/148i-GB-5B-HKUP-EU
                    Any help ?
                    thanks in advance for sharing the file

                    Comment

                    • Obsesion
                      New Member
                      • May 2016
                      • 2
                      • España

                      #11
                      Re: Help ! Blaupunkt 32/147i

                      Originally posted by HAA
                      Hello All
                      I am looking for Eeprom dump for Blaupunkt TV model: 32/148i-GB-5B-HKUP-EU
                      Any help ?
                      thanks in advance for sharing the file
                      https://mega.nz/#!Lj5SwK5Z!6SaSuYg6-...zhCGoBTE%C2%A0

                      Comment

                      Related Topics

                      Collapse

                      • Daniel Larsson
                        Firmware file for Marantz NR1501 needed
                        by Daniel Larsson
                        Hi all,

                        I picked up a Marantz NR1501 that the seller said did not produce any audio, but was starting up just like normal. This was indeed the case and the hunt for damaged components started.
                        After confirming all voltages and replacing all caps on this godforsaken HDMI-board I finally got sound from the AUX input, but all digital inputs are still dead.

                        The service menu shows no DSP version so I desoldered IC1604 that should have the serial flash DSP firmware on it and made two dumps that turned out identical.
                        The content of these seems to be useless as far...
                        05-23-2025, 04:11 AM
                      • GeckoGreen
                        Samsung service bulletin: need firmware file for PN63C550 TV
                        by GeckoGreen
                        Hi,

                        I'm hoping someone with access to the Samsung GSPN can help me. I need someone with access to download a firmware file for my PN63C550 TV, as it will fix a problem per the Samsung service bulletin.

                        You can reference Samsung bulletin #:ASC20130528001 and I need the [2D63]LOGIC.bin file please.
                        The full service bulletin is linked here: https://www.avsforum.com/attachments...3-pdf.1080602/

                        Will you please help me get the [2D63]LOGIC.bin file for my TV?
                        05-17-2025, 02:47 PM
                      • sikocan
                        Lenovo X1 Carbon 9th Gen Black Screen
                        by sikocan
                        I believe Chip 2 is BIN is the main one as it contained the Windows product key, marked with XXXXX for now.

                        SN: PF3G1REP
                        MODEL: 20KW-00J1AU

                        PROBLEM: Turns on blank screen, charging circuitry motherboard looks good. I have tried another firmware here - but resulted in 5V will not go to 20v due to different PD firmware I believe - using the current firmware it does go to 20V.

                        Requesting a firmware clean/BIOS region cleaned. Here is output from ME Analyzer:
                        ╔═══════════════════════════════════════════╗...
                        06-24-2025, 09:01 PM
                      • macabook
                        🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
                        by macabook
                        Hello everyone,

                        I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
                        🧩 Initial Issue
                        • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
                        • External display (HDMI) shows
                        ...
                        07-24-2025, 02:17 PM
                      • Kolecki
                        Epson et-2756 Firmware dump file
                        by Kolecki
                        Hi I need bios or firmware dump file to printer Epson et-2756. Can you help me. My printer is bricked in printer mode and i need reprogram chip on board
                        01-18-2025, 11:38 AM
                      • Loading...
                      • No more items.
                      Working...