Salora 32LED8115CDW switches on and off.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk
    #21
    Re: Salora 32LED8115CDW switches on and off.

    The trouble is that tv only uses one eeprom ic i think a lot of newer tvs maybe like yours uses two ics maybe spi flash ics so im not a 100% sure you can copy the data etc as not all programmers can read and write the data on too the ics thats why im hoping a more experienced member maybe able to help/advise us/ In the mean time i would try looking for a replacemnet mainboard just in case you cant sort the firmware issue out.

      Comment

      • Nikolai Tesla
        Member
        • Oct 2016
        • 28
        • Netherlands
        #22
        Originally posted by vinceroger69
        The trouble is that tv only uses one eeprom ic i think a lot of newer tvs maybe like yours uses two ics maybe spi flash ics so im not a 100% sure you can copy the data etc as not all programmers can read and write the data on too the ics thats why im hoping a more experienced member maybe able to help/advise us/ In the mean time i would try looking for a replacemnet mainboard just in case you cant sort the firmware issue out.
        What makes it harder that there are 2 memory ic's involved? Am I wrong that I think you can read them seperately? But I agree that we beter can wait for a more experienced technician.

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk
            #23
            Re: Salora 32LED8115CDW switches on and off.

            Im sure ive read a thread somewhere regarding this but its been a while so cant find the site i was on hence saying not 100% sure what numbers are printed on the two ics your freezing maybe then we can see if the programmers can read/write too them.

              Comment

              • Nikolai Tesla
                Member
                • Oct 2016
                • 28
                • Netherlands
                #24
                Re: Salora 32LED8115CDW switches on and off.

                Problem solved!

                I asked the Salora agency in the Netherlands dor the firmware and bootloader. I think they send me the firmware (it had the name upgrade loader.pkg).
                What I did:
                1. put the software on an USB-stick
                2. cooled the U10 and U12 flash roms till they looked white
                2. press ok on the remote
                3. put in the AC cable in the wall socket
                4. stopped pressing ok when the led flashed quickly
                5. The tv came up on 1, but...the software was updated.

                The problem is over!

                Ki9nd regards from the sunny Netherlands, I hope someone can repair his/her (Vestel) tv with this trick.

                  Comment

                  • vinceroger69
                    Badcaps Legend
                    • Mar 2012
                    • 6714
                    • uk
                    #25
                    Re: Salora 32LED8115CDW switches on and off.

                    Thanks for the update and glad the firware fixed the tv if you have some spare time could you upload the firmware to the eeprom thread or just attach it too this thread as this may help other members with this same issue thanks.

                    eeprom dump thread
                    https://www.badcaps.net/forum/showthread.php?t=59877
                    Last edited by vinceroger69; 05-31-2017, 07:30 AM.

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • MrCreosote
                        2 Belkin KVM switches have dim VGA output
                        by MrCreosote
                        When compared to a direct VGA connection, these 2 switches both output a darker image. The switches are:

                        4-port Omniview Pro2 f1dz104t
                        8-port Omniview either f1da108t OR f1dz108t (look and function same, OSD may be only difference.)

                        The 4 is dimmer, the 8 is massively dimmer - both with same AC adapter and cabling.

                        AD ADAPTER:

                        There were issues with previous AC adapter, it failed during lightning strike that blew up TV and other stuff and tripped a 15 amp breaker in the main panel which also had a whole house Cutler Hammer surge...
                        08-15-2023, 08:26 PM
                      • _max_
                        Hisense H60N5705 automatically switches off
                        by _max_
                        Hisense H60N5705 installed in a conference room, turns off automatically a few minutes after being switched on.

                        Problem occurred suddenly, during a video conference. Switched on again by the remote control, it continued to work for a while and then switched off again.

                        Power cable and HDMI cable checked.

                        No changes by connecting the TV to another source but, even if it is left on the OSD menu, it stays on for a few minutes and then switches off.

                        So they took the TV (a 60' which is not easy to handle) to the lab and asked me to check it.
                        ...
                        03-07-2025, 06:14 AM
                      • merkin
                        help with finding replacement switches
                        by merkin
                        These switches are bad and I need a replacement.
                        The dimension are:
                        L: 10mm
                        W: 5mm
                        H: 4.5mm

                        Pins are 5mm center to center both length wise and width wise.

                        Any help would be appreciated....
                        02-13-2024, 11:31 PM
                      • dfear
                        MSI GP62 6QF - powers on, keyboard and power button lights up, then switches off.
                        by dfear
                        MSI GP62 6QF - powers on, keyboard and power button lights up, then switches off.

                        Motherboard is: MS-16J51 (i think).

                        Symptoms:
                        1) press power button: keyboard and power button leds light up.
                        a) nothing on the screen.
                        b) fans are not spinning.
                        c) no sounds.
                        2) after about 1 min 15 secs the laptop switches off.

                        Video of the issue: https://youtu.be/Q913lEgnYZ4

                        I have tried flashing the bios, which I download from:
                        here.

                        Not sure this board has a separate flash chip for the EC....
                        08-03-2022, 03:06 PM
                      • Fritter
                        Marantz m cr611. Switches off. No stby.
                        by Fritter
                        Hi
                        Bit of a weird one. Unit will only stay on for a few minutes and functions correctly while it's on. Output to speakers normal. Then switches off. No power, no standby, unit is dead. 10 minutes later, it can be turned back on and functions normally again. It's not generating any heat. Has anyone seen anything similar ?
                        11-04-2023, 10:14 AM
                      • Loading...
                      • No more items.
                      Working...