panasonic tc-p42c2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • loonytu
    Member
    • Feb 2012
    • 10
    • canada

    #1

    panasonic tc-p42c2

    i have what looks like burn in really bad but sometimes it goes away for a few seconds then comes back what could be the problem .if I go into menu it looks good but when I exit it u can see the burn in
    Last edited by loonytu; 04-17-2017, 07:48 PM.
  • chrismurphy
    Badcaps Veteran
    • May 2014
    • 251
    • australia

    #2
    Re: panasonic tc-p42c2

    use burn in white wash if available or run with white noise for one day on full brightness

    Comment

    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago

      #3
      Re: panasonic tc-p42c2

      Is the main Bd for this TV TNPH0800 2A?...If you are parting this TV for sale I am willing to purchase the Main Bd if the Part No. is TNPH0800 2A. Thanks.

      Comment

      • loonytu
        Member
        • Feb 2012
        • 10
        • canada

        #4
        Re: panasonic tc-p42c2

        what is white noise I do have scrolling bar in menu

        Comment

        • loonytu
          Member
          • Feb 2012
          • 10
          • canada

          #5
          Re: panasonic tc-p42c2

          TNPH0831 2A that's my number on main board

          Comment

          • ReeceyBurger123
            Never Give Up !
            • May 2014
            • 7325
            • Britain

            #6
            Re: panasonic tc-p42c2

            Normal for a pdp tv change cell light to lower.
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • loonytu
              Member
              • Feb 2012
              • 10
              • canada

              #7
              Re: panasonic tc-p42c2

              not sure what u mean

              Comment

              • Andrew F. Ali
                Badcaps Legend
                • Jan 2014
                • 2450
                • Trinidad & Tobago

                #8
                Re: panasonic tc-p42c2

                Originally posted by loonytu
                TNPH0831 2A that's my number on main board
                My Panny is TC-P42X1...I'm still interested...Thanx.
                Here is the service manual...hope it can help you.
                Attached Files
                Last edited by Andrew F. Ali; 04-19-2017, 04:59 AM.

                Comment

                Related Topics

                Collapse

                • Andre Gilbert
                  Panasonic TC-P55ST50 8 blinks then no blinks
                  by Andre Gilbert
                  Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                  Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                  TV Model: Panasonic TC-P55ST50
                  ...
                  11-20-2024, 08:52 PM
                • ttmi100x
                  HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
                  by ttmi100x
                  Greetings everyone,


                  I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


                  The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
                  Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

                  Upon closer inspection...
                  07-31-2024, 06:36 PM
                • howardc64
                  Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure
                  by howardc64
                  Eventually discovered a burn mark near lower corner of LCD. Here is a summary
                  • Backlight on, no image
                  • Disconnect right buffer board (view from front), left side display comes on
                  • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
                  • Buffer board is pretty simple
                  Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...
                  07-11-2025, 04:04 PM
                • AquaMan Ua
                  Problem with PANASONIC CF53 laptop after changing BIOS settings
                  by AquaMan Ua
                  Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                  05-17-2025, 09:40 AM
                • stecos
                  Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                  by stecos
                  Hi everyone!
                  I happened several times, in the search for help from the web, to consult this very interesting forum.
                  So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                  Having said that I come to the gist of my post on the forum as the title suggests.
                  For my passion for technology I'm now collecting several...
                  11-28-2022, 11:39 AM
                • Loading...
                • No more items.
                Working...