Re: Panasonic tc-p50s2
That p6 connector goes to aboard main board thats all i know
loonytu
Member
Last Activity: 10-11-2020, 05:14 PM
Joined: 02-23-2012
Location: ontario
-
-
Panasonic tc-p50s2
I have 10 blinks and i was checking power and realize that the connecter p6 on power board pin number three has no 15 volts when turn on i only get .22 volts then off what could it be thanks for your help -
Re: samsung un50eh5300f
board number is bn44-00668a
pin1 116v off 2v on
pin2 109.04 off 7.4v on
pin3 109.4v off 2.2v on
pin4 107v off 6v on
pin5 112.5v off 6v on
pin6 230v off 340v onLeave a comment:
-
Re: samsung un50eh5300f
i just measured volts to led plug and im getting around 113volts to the gray wires...Leave a comment:
-
samsung un50eh5300f
having problems with this led the tv turns on flash light test done I can see menu but no backlight I check volts but seem outve wack. i see two test points for leds and if i touch one test point cross it over and touch one of the black wires on led plug they light up what should the volts be at led plug anyways -
Re: panasonic tc-p42c2
not sure what u meanLeave a comment:
-
Re: panasonic tc-p42c2
TNPH0831 2A that's my number on main boardLeave a comment:
-
Re: panasonic tc-p42c2
what is white noise I do have scrolling bar in menuLeave a comment:
-
panasonic tc-p42c2
i have what looks like burn in really bad but sometimes it goes away for a few seconds then comes back what could be the problem .if I go into menu it looks good but when I exit it u can see the burn inLast edited by loonytu; 04-17-2017, 07:48 PM. -
Re: Toshiba 42rv530u psu, keeps blowing fuse resistor
hi im having the same issue how do I tell if I have rev1 or 2Leave a comment:
No activity results to display
Leave a comment: