HISENSE F42K20E 158308 not turning on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pudgi300
    Member
    • Nov 2008
    • 35
    #1

    HISENSE F42K20E 158308 not turning on

    Hi,
    Just finished repairing a Hisense f42k203. It is the 150308 and E120111.
    Checked P/s voltages with only red led on {would not turn blue}
    XP902 connector
    stb = 3.7v
    5v = 5v
    12v = 12v
    PWM= 0v
    sw = 0v
    18v = 18v

    xp902 had 131v on +1 pin

    Tried EEPROM but that did not work

    While looking for another main board noticed the N4 regulator was very discolored. Checked it out AZ1080D and replaced it with UZ1080L and TV fired up perfect. Also put the original EEPROM back in and it worked perfect.
    The N4 input of 5v was right on and a perfect 3.3v output. Noticed it was still getting very hot so i put a small heatsink on N4.
    Attached Files
    Tags: None
    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa
      #2
      Re: HISENSE F42K20E 158308 not turning on

      Nice Hope it keeps working though. Wouldn't think it should get so hot unless something downstream is drawing excess current. Maybe check components around it getting hot also.
      I assume no responsibility for any stupid suggestions I might post.

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA
          #3
          Re: HISENSE F42K20E 158308 not turning on

          Something is still drawing too much current, keep an eye on it.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • pudgi300
              Member
              • Nov 2008
              • 35
              #4
              Re: HISENSE F42K20E 158308 not turning on

              Thanks for the reply. TV is still going. Temp. on regulator is around 120f. Maybe a little hotter closer to the 3.3v output on board. I have seen a few other boards with the same discoloration on N4 . I think Bud is right that something is drawing too much current. Maybe if someone has one of these tv's they could let me know how Hot N4 is getting on their TV and if they sense it has overheated.

                Comment

                • pudgi300
                  Member
                  • Nov 2008
                  • 35
                  #5
                  Re: HISENSE F42K20E 158308 not turning on

                  Here is a board from ebay with same problem. N4 is between the tuner and cpu in center of board. az1084d
                  Attached Files
                  Last edited by pudgi300; 01-29-2017, 09:52 AM.

                    Comment

                    • ReeceyBurger123
                      Never Give Up !
                      • May 2014
                      • 7325
                      • Britain
                      #6
                      Re: HISENSE F42K20E 158308 not turning on

                      Checked the caps near it especially the little ceramic one ?
                      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                      https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        • pudgi300
                          Member
                          • Nov 2008
                          • 35
                          #7
                          Re: HISENSE F42K20E 158308 not turning on

                          pulled caps around N4 c311,c48,c46 are 10uf low esr c50 and c47 are .1uf c18 is 4.6uf low esr R28=110 ohms r29=180 ohms r79=4.7k r80=4.6k

                          TV is still working fine except n4 heat The STB is 3.7v so with no schematic don't know if that is correct.

                          Later

                            Comment

                            • Agent24
                              I see dead caps
                              • Oct 2007
                              • 5037
                              • New Zealand
                              #8
                              Re: HISENSE F42K20E 158308 not turning on

                              Could it just be a trashy design which runs the regulator hard?

                              What if there was too high ripple going into it?
                              Last edited by Agent24; 01-29-2017, 06:07 PM.
                              "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                              -David VanHorn

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                Working...