Sharp Aquos TV Model LC-65LE654U Keeps Restarting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Denkodt
    Member
    • Aug 2014
    • 16
    • USA

    #1

    Sharp Aquos TV Model LC-65LE654U Keeps Restarting

    Hello;

    My sharp TV Model LC-65LE654U just keeps restarting. It starts, I can see the SHARP logo, the logo disappears, the tv stays on for about 40 seconds, and then restarts again. None of the buttons are responsive so I can not turn it off or on, change input, change volume or channel. So the whole TV is unresponsive, but it just keeps restarting after being on for about 40 seconds. Can anyone help me out?

    Thank you
  • jazzie366
    Badcaps Veteran
    • May 2016
    • 304
    • United States

    #2
    Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

    Originally posted by Denkodt
    Hello;

    My sharp TV Model LC-65LE654U just keeps restarting. It starts, I can see the SHARP logo, the logo disappears, the tv stays on for about 40 seconds, and then restarts again. None of the buttons are responsive so I can not turn it off or on, change input, change volume or channel. So the whole TV is unresponsive, but it just keeps restarting after being on for about 40 seconds. Can anyone help me out?

    Thank you
    Well, I did some research and found that they used a combination of Rubycon, Sanyo, and Nippon Chemi-Con capacitors in the supply. The power supply looks decently made as well, so I'm surprised if that's the issue. However, there's two kinds of board, one has all those good caps, the other one has those caps, and then a lot of shit ones I can't recognize the brand on them, they're neon yellow.

    You're gonna have to open the TV up to see if you can access the PSU board and video processor board. Are you up to the task?

    Please make sure: The unit has been powered down for at least 24 hours.

    You are equipped with the proper tools and work area to work on it in so you can organize everything.

    Make sure to watch a few tutorials on the disassembly of this unit before attempting this, cover the display with a towel to prevent scratches, also use adequate padding.

    Now, if you're going to open this, you'll see the board will be on the back of the display, look for any capacitors that are bulged on the top that could also be leaking that look like this:


    I found on youtube as well there's a lot of videos on how to repair these TVs, so I would recommend you look there.

    Let us know how you fare!

    Also, you're doing this at your own risk, don't do anything you feel uncomfortable with.
    Last edited by jazzie366; 01-27-2017, 11:06 AM.
    Popcorn.

    Comment

    • Denkodt
      Member
      • Aug 2014
      • 16
      • USA

      #3
      Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

      Originally posted by jazzie366
      Well, I did some research and found that they used a combination of Rubycon, Sanyo, and Nippon Chemi-Con capacitors in the supply. The power supply looks decently made as well, so I'm surprised if that's the issue. However, there's two kinds of board, one has all those good caps, the other one has those caps, and then a lot of shit ones I can't recognize the brand on them, they're neon yellow.

      You're gonna have to open the TV up to see if you can access the PSU board and video processor board. Are you up to the task?

      Please make sure: The unit has been powered down for at least 24 hours.

      You are equipped with the proper tools and work area to work on it in so you can organize everything.

      Make sure to watch a few tutorials on the disassembly of this unit before attempting this, cover the display with a towel to prevent scratches, also use adequate padding.

      Now, if you're going to open this, you'll see the board will be on the back of the display, look for any capacitors that are bulged on the top that could also be leaking that look like this:


      I found on youtube as well there's a lot of videos on how to repair these TVs, so I would recommend you look there.

      Let us know how you fare!

      Also, you're doing this at your own risk, don't do anything you feel uncomfortable with.

      Thank you for your quick reply. I took the tv apart and everything appears to be good. I included some pictures of the power board. I do have the yellow capacitors. Do you think they are bad?
      Attached Files

      Comment

      • Denkodt
        Member
        • Aug 2014
        • 16
        • USA

        #4
        Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

        I fixed it. Thank you for your reply and help. I saw on YouTube how someone reinstalled the firmware to solve it, and it worked for me. All the buttons work now and the tv is as good as new!!

        Comment

        • jazzie366
          Badcaps Veteran
          • May 2016
          • 304
          • United States

          #5
          Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

          Originally posted by Denkodt
          I fixed it. Thank you for your reply and help. I saw on YouTube how someone reinstalled the firmware to solve it, and it worked for me. All the buttons work now and the tv is as good as new!!
          Good to hear that worked for you, if you have any other problems with it that might be capacitor related, feel free to post.

          Edit: I don't like those neon SamYoung capacitors, but if it works it works and I'm not gonna complain. They seem to be from a cancelled series of capacitor, I can't find them in any current production datasheets, so I'm going to take a wild guess they're not in production anymore.
          Last edited by jazzie366; 01-27-2017, 02:04 PM.
          Popcorn.

          Comment

          • Uranium-235
            Comrade Glimmer
            • Aug 2007
            • 5042
            • US

            #6
            Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

            Originally posted by jazzie366
            Good to hear that worked for you, if you have any other problems with it that might be capacitor related, feel free to post.

            Edit: I don't like those neon SamYoung capacitors, but if it works it works and I'm not gonna complain. They seem to be from a cancelled series of capacitor, I can't find them in any current production datasheets, so I'm going to take a wild guess they're not in production anymore.
            https://cdn.badcaps-static.com/pdfs/...d5f4c8aee9.pdf
            Cap Datasheet Depot: http://www.paullinebarger.net/DS/
            ^If you have datasheets not listed PM me

            Comment

            • irad
              Member
              • Aug 2010
              • 27
              • USA

              #7
              Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

              Originally posted by Denkodt
              I fixed it. Thank you for your reply and help. I saw on YouTube how someone reinstalled the firmware to solve it, and it worked for me. All the buttons work now and the tv is as good as new!!
              Can you please post the link from youtube that shows how to reinstall the firmware?

              Comment

              • mmartell
                Badcaps Legend
                • Oct 2013
                • 3189
                • Canada

                #8
                Re: Sharp Aquos TV Model LC-65LE654U Keeps Restarting

                Load the firmware to fat32 formatted usb stick and install it to the side usb port. Plug the tv in and wait until the screen lights up and says "Thanks for buying a Sharp TV".

                Make sure you rename the file to install.img Done.

                Comment

                Related Topics

                Collapse

                • scubacamper
                  Sharp Aquos LC-70C6400U Half Screen Dark
                  by scubacamper
                  I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                  Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                  when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                  05-03-2025, 12:19 PM
                • sefoster
                  Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                  by sefoster
                  I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                  11-20-2022, 09:29 AM
                • jonah1024
                  Sharp Aquos LC-40UG7252E LCD TV burn in?
                  by jonah1024
                  Hello!

                  I'm a few days old into this TV screens repair universe so please bear with me.

                  Recently, and all of a sudden my 40” 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but I’m shore this is not an OLED.

                  - I did the classic unplug and hold power button to discharge the caps but it didn't help.
                  - I did a factory reset as well...
                  07-16-2024, 04:23 AM
                • klassic
                  Sharp Aquos LC-60LE635E three blinks
                  by klassic
                  Hi community,

                  I will describe my problem with a TV in those short following terms to be the most precise :

                  What i have :
                  Sharp Aquos LC-60LE635E
                  power board DPS-162KP-1
                  main logic board QPWBXF733WJN2

                  symptoms :
                  white led light logo at startup,
                  after 2 minutes, blinking 3 times a row, repeating
                  no backlight (and apparently no picture, checked panel with flashlight)
                  no startup sound

                  powerboard investigations :

                  1-2 PNL : 0v
                  3-4 GND
                  5-6-7-8 UR : 13.15v
                  9-10-11-12...
                  10-24-2023, 01:39 PM
                • foxyUK
                  Sharp Aquos LC-32LE600E, No 12v as no PNL_POW
                  by foxyUK
                  Can anyone help me diagnose this? Almost not worth bothering with, but it has 'sentimental value' for the owner. I'm no TV technician, but dabble a bit.
                  The TV has standby power but no reaction at all to switching on or reboot steps, No flashing lights or response to menu button. All voltages on the power board are correct apart from missing voltage on pin 12 of CN7003.
                  There is 13 v on U7053 but no 3v signal to switch it on. I don't really understand whether the 3v should come from U7401 in the standby control area, or (as suggested elsewhere) from the mainboard via pin 12....
                  10-22-2024, 10:27 AM
                • Loading...
                • No more items.
                Working...