This was retrieved from a posting on this site.
Eeprom dump thread!
-
17MB82_V.0.8.4_Core_Update
This was retrieved from a posting on this site.Willing to help but I'm no expert. -
Re: Eeprom dump thread!
Great Idea this..
Got a few spi dumps for the following brands and models..Don't have full board or panel info on most, but It maybe just worth giving it a go...Attached Filesif you find these attachements useful please consider making a small donation to the site
- Blaupunk BW32Z56BF3TCUG496.zip (3.29 MB, 546 views)
- Blue Diamond BD26LCDVS.zip (3.33 MB, 507 views)
- BlueDiamond BD32LCDS.zip (3.34 MB, 465 views)
- e-motion 39-66j-gb-3b-phcu-roi.zip (3.23 MB, 507 views)
- Jvc Lt-32tw51j.zip (358.3 KB, 459 views)
- LG-32LD420-ZA.BEKWLJP.zip (149.0 KB, 445 views)
- Nordmende NM26913LEDM4.zip (234.5 KB, 343 views)
- Technika LED 40-248l.zip (3.27 MB, 603 views)
- Toshiba 40L1333DB.zip (358.4 KB, 608 views)
Comment
-
Re: Eeprom dump thread!
Freezing chip can sometimes get them to work then you can read correct data from themI assume no responsibility for any stupid suggestions I might post.Comment
-
Re: Eeprom dump thread!
Can someone make a guide on reading/dumping/saving and then creating new eeproms and what hardware is needed? I'm sure if I knew a little more about it I'd have quite a collection of good ones..Comment
-
Re: Eeprom dump thread!
https://www.youtube.com/watch?v=Qy8fh-g5DOM
simple video showing how you do it.Comment
-
Re: Eeprom dump thread!
Bush 40bmk tp.sis231.p83 c13116 lsc400hm06Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
this works with most 40" models using this board
tp.msd309.bp710.zipAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
just tryed the technika LED40-248, main board T.MSD306.69A 11345,yes the tv now turns on and off no probs, but my screen is LTA400HM13, and the pic is upside down and bad, so make sure you dont try it with this combo of board and screen,Comment
-
-
Re: Eeprom dump thread!
Submitted by fpatrice2008
Toshiba:...............48L3433DG
Main board............17Mb95S-1
Panel:..................VES480UNVS-M01
EEPROM:..............MX25L1606E
IC:......................U10Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by dick_barton; 04-15-2017, 04:19 AM.Willing to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
Hy,
It's mboot.bin file of the TV TOSHIBA copy with CH341A (MX25L1606E)
My TV TOSHIBA is 48L1433DG
panel VES480UNVS-M01
But my firmware is corrupt, don't found it.Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
Posted to site by Diff
Seiki SE32HY01UK firmware
Main board...............TP.SIS231.PT751
EEPROM U5...............25Q64BSIGAttached Filesif you find these attachements useful please consider making a small donation to the site
Willing to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
Technika
lcd46-270
w46/57g-gb-3b-ftvu-uk
t.msd306.68a 12023
u10
lta460hm03Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
Technika
lcd40-270
t.msd306.68a
u10
lta400hm07Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
Model: Baird TI5509DLEDBH
BOARD: T.S512.81
ID: U2
IC: 25Q64C
Panel:HK55OWLEDM-EH93HAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Re: Eeprom dump thread!
SONY
Model: KDL-32S5600
Chassis/Version: EX-2N Peppermint_AVC
Panel: LTY320HA03 A02
T-CON: FS_HBC2L V3.0
Inverter (backlight): LJ63-06393A // SSI320_8C01 Rev:0.2
PWM Inverter: OZ9972ASN
MOSFET Inverter: MDD1752
Power Supply (PSU): PSC10265H M G2BS
PWM Power: SSC9503, STR-A6079M, PS2561
MainBoard: 1-878-999-11 - A-1641-831-A
IC MainBoard: PNX85433EH/M2/2008C, NAND512W3A2CN6F, EDE5116AJBG, M25P10, M24C64TDA9995HL, M24C64, TDA10048HN, 74LVC245APW
Тuner: ENG37E10KF
I upload NAND, SPI FLASH, EEPROM /all work perfect/Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
Related Topics
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.
-
Channel: Troubleshooting Computer Displays
07-26-2025, 03:24 PM -
-
by jorpecHi, all
I need the dump/firmware for this tv, it was on a boot loop, i dont have the original corrupted dump because i used a pen drive with a firmware that solved the boot loop, initially it seemed it was ok but the tv has no sound
Thanks10-17-2025, 03:51 AM -
by my2k2Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.-
Channel: Troubleshooting Audio Equipment
07-01-2024, 09:04 PM -
-
by (0)_(0)Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment