Yes i have! I will upload them!
Eeprom dump thread!
Collapse
This is a sticky topic.
X
X
-
-
The tv won't turn on, every voltage are present, checked the screen, backlight... It started with the TV randomly won't turn on, light present, no blinking. I can't check the motherboard's model right now.Comment
-
But this could be a problem with eMMC, post your 24Q40 firmware here and I’ll take a look.Comment
-
Attached FilesComment
-
hard to find new come dumped from working set
"Haier LET29C800" OR "MGS eled29"
same in two brand name :
main MSDV3218-ZC01-01
Mainboard/chassis: MSDV3218-ZC01-01
Painel display LCD: V290BJ1-PE1
Dump flash SPI 25Q32
Attached FilesComment
-
Someone can check , After logo it restart again.
model: OK ODL32661HN-DIB
Main: TP.MS3663S.PB818
Panel HK315LEDM
Comment
-
Yes was not working, "power-up, logo and reset" .
Finally loaded the firmware for one "ok odl 32631H-SB EL" from post https://www.badcaps.net/forum/troubl...64#post1683821 , worked only remote control is diferent and used one universal one.
ThanksComment
Related Topics
Collapse
-
by (0)_(0)Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
by my2k2Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.-
Channel: Troubleshooting Audio Equipment
07-01-2024, 09:04 PM -
-
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....-
Channel: BIOS Requests ONLY!
-
-
by Ancient1Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
by jimhaHi ,
I'm looking for a dump to repair my screen
Thanks-
Channel: Troubleshooting Computer Displays
12-09-2024, 03:52 PM -
- Loading...
- No more items.
Comment