lotas[USER="169795"]lotas[/USER] how to you fix the firmware? Is there a specific software you use to analyze it that flags bad hex? Sorry my ignorance, I’m still learning.

Does anyone have the eeprom dump for the Vizio E461-A1 MB? Board [B]715G5560-M01-000-004X (T) TXCCB02K0390002T[/B]

​Does anyone have the eeprom dump for the Vizio E461-A1 MB? Board [B]715G5560-M01-000-004X (T) TXCCB02K0390002T[/B]

​Does anyone have the eeprom dump for the Vizio E461-A1 MB? Board [B]715G5560-M01-000-004X (T) TXCCB02K0390002T[/B]

​

Thank you very much!!

does anyone have the Emmc dump for the SONY [B]XBR-55X850C?[/B]

​does anyone have the Emmc dump for the SONY [B]XBR-55X850C?[/B]

​does anyone have the Emmc dump for the SONY [B]XBR-55X850C?[/B]

​

Re: Hisense 58R6E3 (Backlights, sounds, no picture)

I am by no means an expert in electronics, just a hobbyist.Yes, it does have backlights on, and you can hear the sound. I checked fuse, and swapped main board and t-con. At this point I am afraid that the problem is in the driver boards since the screen is intact. The right side side shows a white screen when the left side is disconnected from the T-CON. But the left side shows a faded dark gray when connected alone. I measure the clock voltages in both left and right driver boards and they all read 8.2V. I couldn't find a bad...

Re: Hisense 58R6E3 (Backlights, sounds, no picture)

Hey everyone! Anyone got to find a solution for this problem? I have the same model and same issue. Checked caps and resistors everywhere with a cap meter, no shorts. One interesting thing I’ve found is that the led strip leads, one shows 12V and the other one only about 7V.. ��