-
-
Re: Eeprom dump thread!
Hello, I need a dump of U13, U16, U11
Brand: Medion
Model: MD31230 DES-A 65
Chassis (plate or major components): VESTEL 17MB120
Matrix/Panel (if child): VES650QNTA-2D-U12
Other (notes): U13,U11 SPI 25l1606e NAND U11 29f4g08abaea
Symptoms: The TV does not turn on, only the blue LED is on, no 5v on USB
Sorry for my EnglishComment
-
Re: Eeprom dump thread!
Hello, I need a dump of LG 32LM637BPVA
Main board :EAX68167602(1.0)Comment
-
Re: Eeprom dump thread!
Hi all, looking for dump file fof my lg tv
LG 42LV4400 - UA
Flash chip - MX25L6406E
Also, if someone can tell me if i need to relock the chip once it is programmed or not. I havd dtatis bots 0x3C 0xFF 0xFF when locked and 0x00 0x00 and 0x00 whrn unlocked.Comment
-
Re: Eeprom dump thread!
Hello all, we have a Samsung UE55TU8500 4k model. It has picture but it's stucked a bootloop. I have expected a bios fault. MB type is BN51-02756. Bios chip is 25Q80VSIG. Is anyone have bios dump for this model please? ThanksComment
-
Re: Eeprom dump thread!
hello, im looking dump spi for UN49MU6103K (25q40)Comment
-
Re: Eeprom dump thread!
Hi Guys! I'm looking for dump from Panasonic TX-40cs630e.
Led light stays solid red after power on.Comment
-
Re: Eeprom dump thread!
nglese
Good evening
I kindly ask for the dump contained in the nand of the following tv
Brand PHILIPS
Model 42PFL4007H/12
Chassis Q552.4E LA
Main code 705TQCL009001 313929716741
Nand Flash Brand Hynix H27U4G8F2DTR position 7SOAComment
-
Re: Eeprom dump thread!
Hi guys, I need Samsung tv model ue48h6670sz spi firmware. The eeprom is winbond 25q40, 256 kb. Panel number bn96-31530. Thank you so much.Last edited by Cf elettronica; 08-23-2023, 07:42 AM.Comment
-
Re: Eeprom dump thread!
Probably it's my fault, part number is correct. Do you have it?Comment
-
Re: Eeprom dump thread!
And what is the panel number bn96-31530 ?, this number refers to the LVDS cable.Attached FilesComment
-
-
Re: Eeprom dump thread!
I'm so sorry again. Should be this:
cy-gh048cslv1h
Thank you for your patience.Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment