Re: Eeprom dump thread!
Hi I need dump for sharp LC-40LE730E SPI Winbond 25x20BVNIG
Hi I need dump for sharp LC-40LE730E SPI Winbond 25x20BVNIG
-
-
Comment
-
Re: Eeprom dump thread!
Toshiba Models 26HL47, 32HL67U, 37HL67, 40RF350U, 42HL117, 42HL167, 42LX177, 46LX177, 47HL167, 52HL167, 52LX177, 57LX177
2007 LCD TV Seine Update
These TVs are known to have a problem turning on, this may be your fix.
Be sure to download and read the directions.
You will have to get your TV to turn on so if it will not turn on try resetting it. I unplugged my TV for about 10 minutes and when I plugged it back in I had to wait 2 more minutes and the TV turned on. Then I inserted the SD card and the update started. I used a 2GB SD card. Bigger SD cards may not work.Comment
-
-
Re: Eeprom dump thread!
Emerson LC391EM3 Main Board BA21F0G0401 Z_2Last edited by dskall; 03-23-2018, 10:19 PM.I assume no responsibility for any stupid suggestions I might post.Comment
-
Re: Eeprom dump thread!
Bush 40"
MODEL: LE-40GCL-A-W
BOARD: TP.SIS231.P83
LOCATION: U5 - 25q64bComment
-
Re: Eeprom dump thread!
Element ST2947G R10.2 130314
U6Last edited by dskall; 03-28-2018, 05:06 PM.I assume no responsibility for any stupid suggestions I might post.Comment
-
Re: Eeprom dump thread!
I am looking for Eeprom dump Supersonic models sc-1912, sc-2212 or any one with the board CV3393BL-C or similar in any brandAttached FilesComment
-
-
Re: Eeprom dump thread!
hi need a eeprom dump for this Tecknica 32E21B-FHD/DVD display LC320EUNSFM1 main board TP.MSD309.BP85 can anyone help.
Thanks DavidComment
-
Re: Eeprom dump thread!
17mb35-4 flash dumpComment
-
Re: Eeprom dump thread!
Thank you for allComment
-
Re: Eeprom dump thread!
Hi, please your help, I need eprom dump for TV RCA Model RC4001-A board Nro TP.MS3393.PB855
ThanksAttached FilesLast edited by aquilesy; 04-20-2018, 07:40 PM.Comment
-
-
Re: Eeprom dump thread!
Hi. looking for flash dump for Bush 40" led 17MB95M board and VES400UNVS-NO1 panel.
SPI flash MX25L1605D.
Thanks.Comment
-
Re: Eeprom dump thread!
Hi.I'm hoping to find the dumps I've got on another computer and post here just to contribute.Comment
-
Re: Eeprom dump thread!
Thanks turkay06, I will try it and let you know, even that the file name is 17mb95s and not the 17mb95m i have?Comment
-
Re: Eeprom dump thread!
Hi everyone, please find some of the flash dump files i managed to read from tv s (many of them don't have a reference to the main board- sorry), but most if not all should work.
good luck.Comment
-
Re: Eeprom dump thread!
Some more flash dumpsComment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment