Re: Eeprom dump thread!
where can I find a dump file for Jadoo 5
many thanks
where can I find a dump file for Jadoo 5
many thanks
-
-
Comment
-
Re: Eeprom dump thread!
Hello, I need Telefunken D49F283N3C eeprom bin file, problem with this model only flashes red LED
Thanks in advance
is there a new firmware update?Comment
-
Re: Eeprom dump thread!
Hi All,
I am looking for the dump of the NAND K9GAG08U0E for a Samsung UE40D5720RSXXN.
Many thanks in advance
LaurentComment
-
Re: Eeprom dump thread!
Hello, I need Telefunken D49F283N3C dump file, problem with this model only flashes red LED
Thanks in advance
is there also a new firmware update?Last edited by samtron123; 08-31-2020, 12:18 PM.Comment
-
Re: Eeprom dump thread!
Here to add to this nice forum. i have the EEPROM to Magnovox/Funai 43me345v/f7Comment
-
Re: Eeprom dump thread!
This is the bin file for a Samsung UN32J4000 and another bin file with the mainboard its from.Comment
-
Re: Eeprom dump thread!
yes it is sadly.Comment
-
-
Re: Eeprom dump thread!
i am looking for files to put on usb stick for updating technika 32e21b-fhd tv . i believe its really a umc tv but i dont know which model if it had umc badge .
i know its that for sure as it works after freezing the eeprom .Last edited by petehall347; 09-05-2020, 01:26 PM.Comment
-
Re: Eeprom dump thread!
i need firmware for this model
videocon VJP29HH
board868m-jug7-820-1221Comment
-
Re: Eeprom dump thread!
Panel is VES490UNDL-2D-N01
Main is 17MB???????.Comment
-
Re: Eeprom dump thread!
17MB95M Vestel
with USB stick please if the update works
many thanksLast edited by samtron123; 09-08-2020, 09:04 AM.Comment
-
-
Re: Eeprom dump thread!
do you still need the eeprom?Comment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I...
Comment