Does these heatsinks look suspect to you ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rob@mitrax.com.au
    New Member
    • Nov 2016
    • 4
    • Australia
    #1

    Does these heatsinks look suspect to you ?

    Hi Guys,

    I'v got a LG 50pz570 which powers on no sound no picture.

    Looking at Y Sus the heatsinks appear to be badly discoloured . Is this normal or is it an indicator of issues ?

    Photo attached.

    Regards
    Rob
    Attached Files
    Tags: None
    • rob@mitrax.com.au
      New Member
      • Nov 2016
      • 4
      • Australia
      #2
      Re: Does these heatsinks look suspect to you ?

      Title should read "Do these heatsinks look suspect to you ?"

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 30911
          • Albion
          #3
          Re: Does these heatsinks look suspect to you ?

          it could be convection causing the heat to all go to that end.

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago
              #4
              Re: Does these heatsinks look suspect to you ?

              What is the fault/symptom you are having with your TV for you to suspect the heat sinks on the Y-SUS Bd?

                Comment

                • ReeceyBurger123
                  Never Give Up !
                  • May 2014
                  • 7325
                  • Britain
                  #5
                  Re: Does these heatsinks look suspect to you ?

                  Please research on how to test Plasma Ysus boards, no point throwing a board in if you have not tested it. Give us the Vsc voltage and Vy which is generated on there. Also Lg generally have shit designed Pcbs so wouldn’t surprise me if alot of heat in that area has discoloured the heatsink.
                  Last edited by ReeceyBurger123; 12-07-2016, 07:37 AM.
                  Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                  https://www.facebook.com/Telford-Tel...7894576335359/

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • MakNCheese
                      ASUS Zephyrus GA401I Severe Lag, Suspect Motherboard/Power Issue - Need Help Diagnosing
                      by MakNCheese
                      Hi everyone,

                      I'm having a serious issue with my ASUS Zephyrus GA401I (4 years old, worked perfectly until recently). The system is lagging heavily, even in the BIOS, and is charging extremely slowly (a few percent in hours), making it nearly unusable. I suspect a motherboard or power delivery issue.

                      Symptoms:
                      • Severe lag across the system, including BIOS navigation.
                      • Slow boot times and unresponsive performance in Windows.
                      • Battery charges very slowly (e.g., ~5% in 2–3 hours).
                      • No error messages or BSODs, just extreme sluggishness.

                      What I've Tried:
                      • Replaced
                      ...
                      06-04-2025, 12:48 AM
                    • cheeky2
                      MSI GTX 970 4G V316 1.1 Loads of lines across screen suspect memory??
                      by cheeky2
                      Recently purchased this MSI GTX 970 Gaming 4G graphics card and card shows plenty of lines when booting up to bios and into Windows.
                      What are your thoughts memory issue as I don't have that much experience repairing graphics cards?
                      I have checked before plugging in card for shorts on the 12V power rails, PEX etc otherwise I wouldn't have plugged the card into the motherboard.
                      The screen shuts down if I load the drivers on the card.
                      See attached pictures.
                      Any thoughts with what is likely to be the issue? I suspect a faulty Samsung memory chip and if so would...
                      05-28-2025, 07:49 AM
                    • Arkangelus
                      I suspect the PCH, and I don't know how to check it.
                      by Arkangelus
                      I am inspecting an HP device, model 0PAD DA0PADMB8G0 REV: G, with processor i5-1035G1 and I suspect the issue with the PCH because, when connecting the original charger, there is no LED indicating detection, but the PCH gets slightly warm to the touch.

                      Measuring the coils near the processor, there is no short circuit. In voltage drop measurement, I get a reading of 0.107, and in ohms I get a reading of 134.2. On the 5V coils, I get OL, and the voltage drop measurement gives me 0.384. On the 3V coil, I also get OL, and the voltage drop measurement gives me 0.323.

                      This...
                      01-23-2025, 08:52 PM
                    • Uranium-235
                      Money for scrap computers and copper heatsinks
                      by Uranium-235
                      Has anyone ever gone down this road? I have a number of copper (and copper plated :/ ) and aluminum heatsinks. As well as full computers. Ever heard of any companies that will buy them off me (for not that much probably). I've been sending them to e-recycling

                      I kept a beige taaaaall antec case, going to try TC's yellowing remover and try to create an old system. Probably multiboot with DOS and 98 and 2k to cover all my bases

                      Maybe even use a certain Voodoo5 card in it
                      10-09-2022, 01:44 AM
                    • AJ847.63e
                      HP Pavilion X360 14-dh1084tu Suspect faulty SIO
                      by AJ847.63e
                      Hi all,

                      I've got a mainboard FAROE DIS X32 MB MV 18742-1 0GG03.0011.

                      Original state was I was getting 3v on the power button. Went through the schematic power sequence and we seem to be getting stuck at point -4. The outputs from the SIO 5V_S5_EN and S5_EN are missing, and the inputs for PU4551 seem wrong. 1.36V and 9.6V for En1 and EN2 respectively. At first I was getting 3.34V on EN1 but it's seemed to have dropped. PWR_5V_FB is 0.6V.

                      Checked all around the board can't see any shorts, except around the dimm slots and CPU so I'm assuming that's normal. 180...
                      08-06-2024, 11:52 PM
                    • Loading...
                    • No more items.
                    Working...