Announcement

Collapse
No announcement yet.

LG 55LM4600-UC Backlight Shuts Down

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LG 55LM4600-UC Backlight Shuts Down

    I am working on LG 55LM4600-UC and LED backlight shuts down after a few seconds. Audio normal. LED on main board EAY62512801 blinks three times and stops and than repeats. Checked main electrolytic caps and they are okay. Since I am not very familiar with this model, could I get some troubleshooting tips. Thanks! Mike

    #2
    Re: LG 55LM4600-UC Backlight Shuts Down

    Done any research on testing the Led voltages ?
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment


      #3
      Re: LG 55LM4600-UC Backlight Shuts Down

      This video may give you a idea how to check the led voltages etc if have have problems post a picture of the led connector area of the power supply then we maybe able to tell you what pins etc to test. What power supply does this set use?
      https://www.youtube.com/watch?v=Bf5T2wwtydY
      Last edited by vinceroger69; 11-23-2016, 12:36 PM.

      Comment


        #4
        Re: LG 55LM4600-UC Backlight Shuts Down

        The LED+ voltage to ground is 78 volts than drops to 71 volts after backlight shuts down. While the backlights are lit for about 5 seconds, the V1, V3, V5...are about 8.7 volts to ground. After backlight shuts down the voltage is about 20 volts to ground. With LED sockets removed the voltage is about 102 volts to ground at LED+. Thanks for your help.
        Attached Files

        Comment


          #5
          Re: LG 55LM4600-UC Backlight Shuts Down

          I have the service manual for 55LM4600; however, does anyone know how that I can get the power section schematic? Thanks, Mike

          Comment


            #6
            Re: LG 55LM4600-UC Backlight Shuts Down

            You need to find out if the BL-ON and the DIM control signals are still present or not when the backlights drop out.
            This TV has 12 strings of LEDs, the Vxx pins are for the Cathode retun lines for the LED strings.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment


              #7
              Re: LG 55LM4600-UC Backlight Shuts Down

              Here are additional voltage information; I am assuming that I have a bad LED on string 6.

              Voltages for each LED String measured at board pins (volt to ground):
              Backlight on..........Backlight off
              LED+ 78.8.............71.3
              VC 1 8.4..............19.8
              VC 2 8.2..............19.5
              VC 3 8.6..............19.6
              VC 4 7.7..............19.7
              VC 5 8.4..............20
              VC 6 1.3..............24
              VC 7 8.6..............19.9
              VC 8 8.4..............19.9
              VC 9 8.6..............20
              VC 10 8.6..............20
              VC 11 8.4..............20
              VC 12 8.9..............20

              Comment

              Working...
              X