Plug the set in and you get the amber logo then turn on with remote or button on side logo turns white screen comes on with vizio logo then shows the selected input for a couple seconds and shuts off. For a couple tries when i first plug it in it may stay on for a couple minutes and then you'll get picture then after another minute or 2 sound and eventually off. During the on time any functions were delayed by 5 to 10 seconds. You could hit menu then 5 to 10 seconds later it would come up down arrow then to 10 seconds the menu would move down one slot hit ok then 10 seconds later next sub menu would come up etc. Eventually it got to where it is now boots up and shuts off within a few seconds. Power supply seems fine from what i read and checked as do the voltage regulators, i bought the repair kit from ebae and once i saw what they gave me i tested those 2 fuses and regulators which are good so didnt change anything on the board yet.
Vizio m550sv shutting off after boot up
Collapse
X
-
Re: Vizio m550sv shutting off after boot up
Not sure if this TV is LED or CCFL backlights. Either way I would check that next and if that seems OK, I'll look then at the Main Bd voltages and see what is missing when it shuts off. -
Re: Vizio m550sv shutting off after boot up
I think led. Im at work now will get some pics and voltages when i get home later. The bl voltage on the ps board jumps around a bit on startup as the screen brightness changes but i think this is normal. Lmk what you think i should checkComment
-
Comment
-
Re: Vizio m550sv shutting off after boot up
Those Voltages and the signals are OK.
Need to check the LED driver board (the Green sub board on the power supply) to see what you have on the LED connectors. Need closed up pictures of the LED connector and the whole back side of the TV so we can see how all the boards are connected together.
This board looks like the board you have, please verify.
http://www.shopjimmy.com/vizio-0500-...-led-board.htm
Delta DPS-216CPLast edited by budm; 11-02-2016, 09:57 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Vizio m550sv shutting off after boot up
Post #6
"Need closed up pictures of the LED connector and the whole back side of the TV so we can see how all the boards are connected together."Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Vizio m550sv shutting off after boot up
I guess im misunderstood. I posted a picture of the back of the tv and the small green board on the power supply. Do you want the 2 connectors just above that board.?Please excuse my stupidity and i really appreciate anyones help.Comment
-
Re: Vizio m550sv shutting off after boot up
Sorry, I see all the board now.
https://www.badcaps.net/forum/attach...3&d=1478147261
So the connector on the LED driver green board that goes to the main board will be where the control signals for the backlights are, then the two white connectors CN302, CN303 with the wires going inside the panel will be where you need to test the LED Voltages (FB1~16 with ref to chassis GND) for each string of the LED, it has 16 strings of LEDs. You will have to turn the TV off, put red probe on FB1 then urn on the TV and take the DCV reading, record that reading, then turn the TV off and then repeat the same procedure for FB 2~16.
Pictures provided by shopjimmy.Last edited by budm; 11-03-2016, 02:10 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Vizio m550sv shutting off after boot up
Tried to take a video of what it does.
https://youtu.be/4i4rFgRM9sYComment
-
Re: Vizio m550sv shutting off after boot up
Yurg,
what you are describing sounds like a main board issue more than anything else due to the delay on screen from the time you were pressing the buttons. This could be either software related, or another malfunction from the main board.Comment
-
Re: Vizio m550sv shutting off after boot up
I got the input changed from rgb to hdmi and now it will stay on longer sometimes for 30 sec sometimes up to 5 minutes sometimes audio will come on after 45 seconds then video a bit later sometimes not. All functions are delayed like the processor is overworked or ram is filled up menu functions are delayed by 3 to 20 seconds per button push.Comment
-
Re: Vizio m550sv shutting off after boot up
sounds like a mainboard issue whats the part number on the mainboard and from any stickers on the board as it needs to match your lcd panelComment
-
Re: Vizio m550sv shutting off after boot up
I am fairly sure there is no one capable of figuring this TV out I have replaced everything with new parts in mine except for my Timing control board I am about ready to order that and if it doesn't work I may just make a video of me bashing it in with a baseball bat and post it on youtube and see how many hits I get for the heck of it.
I could have had a couple of decent tv's with the money I spent on this thing.
TV
Please note: I am not responsible for any harm caused to you anything discussed is just discussion. Before you try anything discussed be sure that you have the appropriate knowledge and safety gear for the job. Like with anything education and safety are first! Do not try anything @ home without it.Comment
Related Topics
Collapse
-
I have a PS5 that will turn off after anywhere from about 5 to 30 seconds after power-on. It will sometimes make it to Safe Mode, but won't last long there. The following are steps I have taken:
1 - Tested on multiple sources of 12v power including 2 separate bench power supplies. Doesn't fix the issue, which at least to my mind, rules out the power supply as the problem.
2 - Visual inspection of board. Absolutely no signs whatsoever of burns or failed components.
3- Checked for standby voltages. All seem normal.
4 - Added liquid metal and re-spread... -
by eigmaHi, I rescued a Samsung UN40H5003AF (H = 2014 FHD) from the curb. Symptoms are: standby (red) light comes on, stays on for 8 seconds, flickers off, then comes back on, and the cycle continues.
Service manual: https://www.electronica-pt.com/esque...is-u8la-71272/
SMPS board: checked voltages, all seem normal (A13V = 12.8V, UD = 3.3V, PWM_BLU = 0.77V, PS_OnOff = 5.5V). Remove 10p cable to main board -> backlight comes on. I think this means SMPS board and backlight are good.
Main board: BN94-07592P / BN97-08922R...1 Photo -
by Bob1394I have used the search, and am stumped.
My Vizio M65-C1, Vizio logo appears for about 10 seconds then goes off.Power LED blinks 15 times then the TV powers down.
I have read through many threads on the M65-C1 including the following threads. I feel like I must be looking right past the solution to my problem:
https://www.badcaps.net/forum/showthread.php?t=81088
https://www.badcaps.net/forum/showthread.php?t=84241 (not clear on the Eprom actions)
Observations
1) [Interaction] Power turned on via TV button (or remote)... -
by privato89Hello everyone,
I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.
Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.
Let's begin:
Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the... -
by dariolanaGot this from my kid with a fault on primary side. Main power supply here is AC 220V. All caps were Ok, testing with 2 series lamp of 70W each, got a bright lamp
. Checked main heatsink one by one with my component tester and found one 3 leg buddy MDP18N50 that passed away. Got same replacement after a week, tested, short was gone, now I got 310V on primary.
Happy as a dog, added one case fan for some load and the fan of the PSU. Tested purple wire, got 5.1V, great!. Shorted green and black, fan spins and after about 5 seconds shuts down. I was able to measure doing several iterations...6 Photos - Loading...
- No more items.
Comment