Ok guys, got this tv in with stand by light flashing 7 times and then repeating, done a bit of reading and found out that main board was faulty,
replaced the board with another and now get solid stand by, but when i turn it on, the green and amber lights flash together non stop,
i did read somewhere on here about the problem and it was 2 mosfets and a fuse-able resistor that was replaced and solved the problem, so i checked this out and mine are fine.
im also getting 24v at the inverter as well, but back light are not turning on,
i need some help on where to go now, as power board volts all seem ok ?
ill get some pics up ASAP.
replaced the board with another and now get solid stand by, but when i turn it on, the green and amber lights flash together non stop,
i did read somewhere on here about the problem and it was 2 mosfets and a fuse-able resistor that was replaced and solved the problem, so i checked this out and mine are fine.
im also getting 24v at the inverter as well, but back light are not turning on,
i need some help on where to go now, as power board volts all seem ok ?
ill get some pics up ASAP.
Comment