Thanks for looking. I have a Vizio E701i-a3 tv that when turned on the backlight comes on for a second or so and then turns off. I do get an image when shining a flashlight on the screen (the message says RGB signal not detected, TV will power off). Another note, the backlight goes out while the Vizio logo is present after TV power on. I have replaced the power supply board with the same result.
This TV has three pairs of wires that power the LEDs. Since I do not have a wiring diagram, the only thing I could do is to remove each pair, one at a time. I still got the same result, no backlight.
Is there any possibility that the mainboard may be the culprit?
Any other ideas?
Thanks again,
Michael.
This TV has three pairs of wires that power the LEDs. Since I do not have a wiring diagram, the only thing I could do is to remove each pair, one at a time. I still got the same result, no backlight.
Is there any possibility that the mainboard may be the culprit?
Any other ideas?
Thanks again,
Michael.
Comment