I have an RCA LED55C55R120Q that I picked up from my local recycling center. It was in the original box and is in really good condition. It turns on with no backlights. This is what I have tested so far:
I can see an image on screen with a flashlight.
I get 3.3 at bl_on and adj pin and it stays steady.
At LED + pins I get 132v when I turn the TV on but that quickly drops, eventually reaching less than a volt.
I am guessing I probably have bad LED's but wanted to be sure.
I can see an image on screen with a flashlight.
I get 3.3 at bl_on and adj pin and it stays steady.
At LED + pins I get 132v when I turn the TV on but that quickly drops, eventually reaching less than a volt.
I am guessing I probably have bad LED's but wanted to be sure.
Comment