Dead Vestel 17IPS71 power board

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

Thats great Will surely help others, and possibly me if I get one of these which will be soon. Not seen many IPS71's yet lol

[london-freddie]

Re: Dead Vestel 17IPS71 power board

No problem thanks again for the help

[budm]

Re: Dead Vestel 17IPS71 power board

Thanks for the follow-up.

[london-freddie]

Re: Dead Vestel 17IPS71 power board

OK update on this dead board, replaced ic FAN6300 and board is now powering up with several output pins now reading 12v, no output voltages were present on this board before.
Not tried it in the tv as thats all working with the replacement ebay board and I dont want to take this tv apart again unless i have to, however I am confident this board is fixed, so you guys can give yourselves a big pat on your back you were right it was the ic giving the problem, I would never of found the fault by myself. Thanks again

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

BTW, did you have a chance to take the resistance readings of the new board and compare them to the bad board?

Bloody good idea Bud !

[budm]

Re: Dead Vestel 17IPS71 power board

BTW, did you have a chance to take the resistance readings of the new board and compare them to the bad board?

[dick_barton]

Re: Dead Vestel 17IPS71 power board

Yes please. It will be interesting to see if it fixes the problem and will be useful for others to know who may have the same problem.

[london-freddie]

Re: Dead Vestel 17IPS71 power board

yes will do, i want to fix this board, now though just to say it is fixed

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

Ok cool keep us updated.

[london-freddie]

Re: Dead Vestel 17IPS71 power board

hi thanks for all this help.
just replaced power board with used ebay board, tv now working fine with this replacement board. However I have also ordered a replacement IC so when that arrives I will replace the IC on the fault board and see if I can get it working, will let you all know how I get on when it arrives and it is fitted.
thanks again all

[dick_barton]

Re: Dead Vestel 17IPS71 power board

With VDD = 192 as per an earlier post by London-Freddie and your readings showing no resistance to ground on any of the pins I think it's time to replace the IC.

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

It might be hard Bud as they change the design every board. But yeah im thinking the Ic is bad, strange as normally when these Ic's fail in Vestels they blow up.

[budm]

Re: Dead Vestel 17IPS71 power board

I have a hard time finding c262 in the diagram.
But from the readings Reece provided, it does look like bad IC at this point.

[dick_barton]

Re: Dead Vestel 17IPS71 power board

London-Freddie
You now need to do the same tests as ReeceyBurger123 has kindly done for you and post back the results.

[budm]

Re: Dead Vestel 17IPS71 power board

Just to be sure, So the resistance between the HV pin and GND pin is (OP was reading about 70K Ohms)? VDD pin and GND pin is (Op was reading about 2K Ohms)?

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

I would say your Smp Ic is probably faulty here. See what Bud and DB think.

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

Right heres what I have:

C262:

Across cap 465 ohms. To ground OL

U202 Fan 6300A nothing gives a reading to ground. VCC nothing to ground either on any pins meter set to several ohms measurements.

D20:

Black on cathode, red on anode:
476Mv drop

Red on cathode, black on anode:
OL

D298:

Black on cathode, red on anode:

087Mv drop

Red on cathode, black on anode:

OL

[ReeceyBurger123]

Re: Dead Vestel 17IPS71 power board

Readings coming shortly.

[dick_barton]

Re: Dead Vestel 17IPS71 power board

If that checks out OK then I would wait and see what information ReeceyBurger123 can offer you tomorrow.

[dick_barton]

Re: Dead Vestel 17IPS71 power board

Here circled in red.