Hello, I'm a new subscriber to this forum. Having some issues with a Samsung UN60FH6003FXZA. Here's the history.
1. Purchased TV second hand under the impression it needed a Tcon board.TV powered on, backlight on, sound on, blank bluish tinted screen. Researched the repair and proceeded with the replacement.
2. Replacement Tcon didn't resolve the issues. Wasn't exactly certain the replacement board was functional, so re installed original. Did some further research. Came across a site advising a reset by holding power button, restarting TV etc. Once done the screen illuminated, briefly saw the menu function screen, but no full visible picture. Checked cables to Tcon etc and restarted, screen would illuminate to various stages. Vertical lines, horizontal lines, white screen with horizontal lines etc.
3. Tried different video sources, results varied, but no video just sound. Horizontal limes seem to show some changes while video is playing, menu button pressed etc. Noting at all viable other than multi colored lines, sometimes fading into white screen, other times just horizontal and vertical.
I'm not certain if the Tcon would cause these issues or maybe the main board itself. Maybe simply the ldvs ribbon. Or worst a completely bad panel. Im seeking some advice prior to moving on. Any assistance is appreciated
1. Purchased TV second hand under the impression it needed a Tcon board.TV powered on, backlight on, sound on, blank bluish tinted screen. Researched the repair and proceeded with the replacement.
2. Replacement Tcon didn't resolve the issues. Wasn't exactly certain the replacement board was functional, so re installed original. Did some further research. Came across a site advising a reset by holding power button, restarting TV etc. Once done the screen illuminated, briefly saw the menu function screen, but no full visible picture. Checked cables to Tcon etc and restarted, screen would illuminate to various stages. Vertical lines, horizontal lines, white screen with horizontal lines etc.
3. Tried different video sources, results varied, but no video just sound. Horizontal limes seem to show some changes while video is playing, menu button pressed etc. Noting at all viable other than multi colored lines, sometimes fading into white screen, other times just horizontal and vertical.
I'm not certain if the Tcon would cause these issues or maybe the main board itself. Maybe simply the ldvs ribbon. Or worst a completely bad panel. Im seeking some advice prior to moving on. Any assistance is appreciated
Comment