Samsung ln46c630

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fixerupper75
    Senior Member
    • Oct 2014
    • 125
    • us

    #1

    Samsung ln46c630

    Came across this tv. The standby light is on, but when i press the power on on the remote. Stand-by light goes out and nothing happens.
    When i disconnect the mainboard form the power board the backlight turns on.
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Samsung ln46c630

    Originally posted by fixerupper75
    Came across this tv. The standby light is on, but when i press the power on on the remote. Stand-by light goes out and nothing happens.
    When i disconnect the mainboard form the power board the backlight turns on.
    You have main board problem, as to what it is at this point I do not know.
    You can try cooling and heating, press on the board, etc. to see if it will do anything.
    You can also check to see which command signal to the power supply board is missing, also try diconnecting the T-Con from the main board to see if the backlights will come on.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • fixerupper75
      Senior Member
      • Oct 2014
      • 125
      • us

      #3
      Re: Samsung ln46c630

      i got nothing with the heating/cooling and pressing on the board. I was thinking main board issue. I'm going to order on and cross my fingers

      Comment

      • fredaelsadany
        Senior Member
        • Jan 2016
        • 66
        • EGYPT

        #4
        Re: Samsung ln46c630

        hi
        in the photo try to measure the voltages according to arrows .
        I think it will lead you to solve the problem .
        please write what you measure to help us to understand exactly the problem .
        thanks
        Attached Files

        Comment

        • fixerupper75
          Senior Member
          • Oct 2014
          • 125
          • us

          #5
          Re: Samsung ln46c630

          Thanks fredaelsadany,
          But i have replaced the mainboard already. It works and ive button it up.

          Thanks to everyone!!!!!

          Comment

          Related Topics

          Collapse

          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • ohren
            Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
            by ohren
            I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

            I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

            The models launched in 2018 and 2019 respectively....
            09-08-2023, 05:24 PM
          • C152Heavy
            Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
            by C152Heavy
            Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

            Summary for TL-DR readers:
            • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
            • Have obtained Samsung schematic & service documents - Can upload if helpful.
            • Have read ALL applicable threads
            • C1818 and CP820 replaced as low hanging fruit
            • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
            • VCC pin (18) of PFC...
            01-11-2023, 02:53 PM
          • Document Archive
            Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
            by Document Archive
            This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
            09-07-2024, 05:50 AM
          • valvashon
            Samsung UN65KU6290F PS board blows fuses
            by valvashon
            Samsung UN65KU6290F (May 2017); received from local Buy Nothing group. Was listed as "just went dead" and they wanted it gone. I brought it home, didn't notice anything visually wrong with the power supply board, looked up the cost of a new one and that's about as far as it went. Family was tired of tripping on the foot of the set so I decided to dig in and repair or toss.

            Can't believe that I didn't check it earlier but I found the main 8 amp fuse blown. Jumped across it with a 10 amp blade style fuse and you can see that it literally exploded inside the second I plugged...
            11-27-2023, 01:09 PM
          • Loading...
          • No more items.
          Working...