Hi Guys got this tv today, the set turns on red turns blue then off again 30 secs later but no picture
removed back no blown fuses, no dry joints, no shorts on fets etc.
(disconnecting z sus and y sus same results)
getting VS-on from mainboard and its steady, got 5v standby, but NO VS/VA NO 12v no 17V or the m5v either voltage regulator seems ok no shorts but theres a diode marked in red when i meter it it seems to be pulsing and my flukes not even getting a reading
oh and no activity on control board
any ideas?
thank you
removed back no blown fuses, no dry joints, no shorts on fets etc.
(disconnecting z sus and y sus same results)
getting VS-on from mainboard and its steady, got 5v standby, but NO VS/VA NO 12v no 17V or the m5v either voltage regulator seems ok no shorts but theres a diode marked in red when i meter it it seems to be pulsing and my flukes not even getting a reading
oh and no activity on control board
any ideas?
thank you
Comment