Hi mate, I messaged you on YouTube, not sure if you go on there much ?
Anyway sorry to bother you but I have a b&w zeppelin gen 1, I got it not working, changed 3 caps and it now works but I’m getting a low du du du du du like motor boating with any cable I plug into AUX it does it with my iPad, and phone and without anything on the cable is there something failed is it an easy fix?
Regards
Gary
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Vestel 17mb110p Firmware Needed
You’re a star thank you so much it works I owe you a beer
Regards
Gary...
-
Re: Vestel 17mb110p Firmware Needed
If you have it please worth a try
Thanks
Gary...
Leave a comment:
-
Vestel 17mb110p Firmware Needed
Hi guys this Tv is just flashing
I believe it's the firmware crashed wondering if there is a core update or something available
Thanks
Gary...
-
Re: Samsung ue32t5300ak
Lotas you're a star god bless you
It worked Tv it now working
Kind regards
Gary
Leave a comment:
-
Re: Samsung ue32t5300ak
Hi Lotas I will try that when I'm home
The error I'm getting is on the programming software nothing on tv screen was disconnected and still there was no change
I will try your other firmware asap I'm out at the minute thanks bud
Regards
Gary
Leave a comment:
-
Re: Samsung ue32t5300ak
thanks Lotas, been trying but
keeps coming up "chip %s with the contents are in disagreement"
im using a bog standard progrm for the ch341a
Leave a comment:
-
Samsung ue32t5300ak
SAMSUNG UE32T5300AK
problem is standby light on just flickers when power button pressed same with remote, beleive its the dredded corrupt firmware if anyone like Lotas can check to see if its corrupt all voltages seem to be there
still doing the same with screen, wifi, speakers disconnected
regards
gary...
-
Re: Vestel 17MB230 and panel VES400UNDS-2D-N11
Here in the uk there’s nothing showing up, the we number on the white label is the one to go by, 23309114, have a look on eBay in Spain for the board under the 17mb97 and the 23309114, failing that go for the model of tv, last screen number you may get a board for that screen just make sure all connections are the same including screen connector, but be warned the remote may not work with the different board….
What was wrong with the tv in the first place ?
Leave a comment:
-
Re: Vestel 17MB230 and panel VES400UNDS-2D-N11
It won’t work it’s from a completely different to set
You need a 17mb97 (type) mainboard you need to match the 23 number on you original mainboard, the one you have in the pictures is a 17mb230 and probably 4k,
Use eBay search for 17mb97 then the 23 number, also cross reference with the original tv model number!
Hope this helps
Leave a comment:
-
Re: Lg 55ef950 oled screen artifacts
When you switch off the to use the remote after it’s been on a good few minutes, then turn off with the remote and wait until red light turns off, try that it clears the screen…
Then if that doesn’t work, maybe use a service remote in-stop and In-start
Leave a comment:
-
Re: Panasonic TX-L37dt30B restarting
Could be firmware is corrupt? stay in menu and turn backlights down really low so you can still see a picture and see if anything changes
Leave a comment:
-
Re: Samsung ue32t5300ak
Hi Lotas, all working now many thanks you're a star
Sorry for the delay had more pressing things to deal with
Once again thank you
Regards
Gary
Leave a comment:
-
Re: Samsung ue32t5300ak
Thanks Lotas I will try it later and post back
Thanks
Regards
Gary
Leave a comment:
-
Samsung ue32t5300ak
Hi everyone hope you're all well,
Does anyone have a firmware file so I can write it to the eprom with a programmer thanks in advance
Gary
No activity results to display
Show More
Leave a comment: