Lg plasma lg60pc1d no power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • clublex
    Senior Member
    • Feb 2016
    • 57
    • United States
    #1

    Lg plasma lg60pc1d no power

    OK so it started with the tv clicking on/off repeatedly and the tv never would turn on. I have read several forums/blogs and checked these items for possible problems;
    1. Power board- I replaced capacitors last year when the same issue occurred.
    I took the board to a local electronics repair shop and they checked it out to
    be good.
    2. I unplugged the ZSUS board and the clicking continued.
    3. I unplugged the YSUS board and the clicking continued.
    4. I took the ZSUS board to the same repair shop and they said it needed to
    be replaced.
    5. Bought a ZSUS board from Union Electronics Distributor. The board came
    with a blown fuse. I replaced the fuse and connected the board. Plugged in the TV and the same clicking on/off repeatedly occurred only this time I smelled a burning odor. I unplugged the TV. I plugged the TV back in to try again and I GOT NOTHING THIS TIME, NO CLICKING, JUST NOTHING.
    6. I called the repair shop and they suspected the new ZSUS board was bad.
    I returned it and ordered another ZSUS board AND A POWER BOARD.
    7. I received both boards and installed yesterday. AGAIN NOTHING....
    I have limited use with a multimeter....
    Please help with any suggestions and thanks in advance.....
    Attached Files
    Last edited by clublex; 02-15-2016, 06:34 PM. Reason: to add pictures
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2152
      • uk
      #2
      Re: Lg plasma lg60pc1d no power

      Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: Lg plasma lg60pc1d no power

          Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • slimmy182
              [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
              by slimmy182
              Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

              I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

              Looking on google I found this:...
              01-14-2023, 11:55 AM
            • stecos
              Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
              by stecos
              Hi everyone!
              I happened several times, in the search for help from the web, to consult this very interesting forum.
              So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

              Having said that I come to the gist of my post on the forum as the title suggests.
              For my passion for technology I'm now collecting several...
              11-28-2022, 11:39 AM
            • Loading...
            • No more items.
            Working...