Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #61
    Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

    That is the problem, we do not have the diagram of the board, otherwise you have to search lots of spec for the IC's.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #62
      Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

      https://www.badcaps.net/forum/showthread.php?t=33209

      You may want to read post 9 by OP so you have to watch where you get the replacement board from.
      I hope that DKWILL will have the follow-up so we can ask him to check the 'LAMP STATUS' pin 13 DCV reading.
      Last edited by budm; 12-24-2015, 12:06 AM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • djju
        Member
        • Dec 2015
        • 40
        • 미국

        #63
        Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

        Originally posted by budm
        https://www.badcaps.net/forum/showthread.php?t=33209

        You may want to read post 9 by OP so you have to watch where you get the replacement board from.
        I hope that DKWILL will have the follow-up so we can ask him to check the 'LAMP STATUS' pin 13 DCV reading.
        Thanks, Bud. But DKWILL's symptom is with audio. With audio means definitely main board works properly. That mean the initial stage of main board is passed and works main function but only screen problem.
        My problem is different. My problem is no picture, no sound, only showing v logo and completely power and backlight off. I hear no sound after having problem.

        By the way, thanks bud. I will ask him where to get the new board. I am going to buy new main board. I really hope that my problem will be solved by replacing new main board.

        Merry Christmas!!!

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #64
          Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

          I am refering to that when he put in the new board (defective board) it acts like your TV.
          Post 9:
          'One more piece of info. I ordered a new main board, board I got I think is defective cause with it installed, tv comes on, same as before, but after showing logo, whole tv shuts down. Power light goes off, this doesn't happen with original board, just loses back light.'
          Shopjimmy is where I get my boards.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • djju
            Member
            • Dec 2015
            • 40
            • 미국

            #65
            Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

            Originally posted by budm
            I am refering to that when he put in the new board (defective board) it acts like your TV.
            Post 9:
            'One more piece of info. I ordered a new main board, board I got I think is defective cause with it installed, tv comes on, same as before, but after showing logo, whole tv shuts down. Power light goes off, this doesn't happen with original board, just loses back light.'
            Shopjimmy is where I get my boards.
            You mean, even though main board is replaced by new, the problem still remains. Therefore, it's not main board problem?

            Comment

            • djju
              Member
              • Dec 2015
              • 40
              • 미국

              #66
              Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

              Originally posted by djju
              You mean, even though main board is replaced by new, the problem still remains. Therefore, it's not main board problem?
              Hi. Bud. Your comments make me confused.
              Last edited by djju; 12-29-2015, 11:29 AM.

              Comment

              Related Topics

              Collapse

              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                11-22-2024, 01:46 PM
              • PantherDave
                Microsoft Surface Pro (5th gen) model 1796 - no power
                by PantherDave
                Hi all!

                I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                https://www.badcaps.net/forum/troubl...-hardware-devi...
                05-29-2024, 02:01 PM
              • GLISIT
                Asus Probook P5440UF-XB74 power issue
                by GLISIT
                Hi all,

                TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                01-16-2025, 02:29 PM
              • Mgiffune
                Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                by Mgiffune
                I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                I ordered a supposedly ‘new' Tcon board this time, and
                ...
                06-09-2024, 10:28 AM
              • mrtek
                Vizio M65-C1
                by mrtek
                Hi.

                picked up another TV. This time is a Vizio M65-C1. TV does not turn on. I had repaired another 60 inch vizio , Bad main board.
                When power button is pressed, the Power led indicator on the bottom right, turns for a few seconds and then it fades away. No backlight or Vizio logo on screen. Removed back cover and repeated test.
                This is the TV This TV is a little different from the Samsung I have worked on. Power supply is on the Left side, Main Bd is on the right side, T-CON , not in the picture is on the bottom. I am assuming that the boards in the middle are the LED...
                07-14-2025, 07:28 PM
              • Loading...
              • No more items.
              Working...