I have a Sharp Aquos 65" (Model:LC-65D64U, Serial:807861227), all of the sudden no picture/no sound. Tried pressing the Input & Volume Down, then plugging in-still no picture/no sound. But I get the one-two blinking code. In other words, Power & OPC blink once, then only Power blinks quickly 2 more times. This code blinks over & over again, so I know it's trying to tell me something.
I'm not an electronics expert, but do know how to fix things. I am fine with doing something like removing the back panel and replacing the power supply board. I'd rather replace an entire Board, rather then tryto isolate the exact part that may be at fault. But, don't know if the problem is the power supply board or some other board.
Does anyone know what the one-two blinking code is trying to tell me. Would appreciate your help. Thank you, Jim
I'm not an electronics expert, but do know how to fix things. I am fine with doing something like removing the back panel and replacing the power supply board. I'd rather replace an entire Board, rather then tryto isolate the exact part that may be at fault. But, don't know if the problem is the power supply board or some other board.
Does anyone know what the one-two blinking code is trying to tell me. Would appreciate your help. Thank you, Jim
Comment