Re: Sharp Aquos 65" one-two blink code??
I assume testing voltages is done with the power off right??
Anyway you can show me on a Board what I would test??
Jim34652
Member
Last Activity: 10-18-2015, 09:05 PM
Joined: 10-18-2015
Location: New Port Richey, Florida
-
Re: Sharp Aquos 65" one-two blink code??
Then, could you tell me again, which voltages do I need to test. I have a DMM.
Thank you for your patience!!Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
Could you recommend were I could by the power supply board & the main board??
And instead of both, if I was to gamble and get one Board to start, which would you get?? Also, may have forgot to mention that I hear clicking, like it's trying to start-so, would that be the power supply board??Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
You wrote;
"That is why you need DMM to test the Voltages and signals"
What is DMM??Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
don't mean to drive you nuts on this but, if Power & OPC flash once together, then Power flashes 2 more times afterwards.
Would that be a total of 3 flashes for Power & one flash for OPC?????Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
Green Power & Green OPC light flash once together.
Then, right after that, Green Power light only flashes 2 more times.
Does this sequence over & over again.
Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
This is exactly what is happening;
"Power & LED flashes together once, then Power flashes twice right after. It does this again & again"
Anyway to know what the correct code is from this??????Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
Not sure if I understand, but aren't those "blinking codes" suppose to tell us what's wrong with it????????Leave a comment:
-
Re: Sharp Aquos 65" one-two blink code??
Hello Budm, thank you for writing back to me so quickly. I read the links you sent. I guess Service Manuel says this is my problem;
Communication failure details (Power LED flashes 3 times and OPC LED flashes)
--just not sure if this is the same as what is happening, which is; "Power & LED flashes together once, then Power flashes twice quickly thereafter. Then does this again & again"?????
If above is correct, Service Manuel says my problem is;
Regular communication that...Leave a comment:
-
Sharp Aquos 65" one-two blink code??
I have a Sharp Aquos 65" (Model:LC-65D64U, Serial:807861227), all of the sudden no picture/no sound. Tried pressing the Input & Volume Down, then plugging in-still no picture/no sound. But I get the one-two blinking code. In other words, Power & OPC blink once, then only Power blinks quickly 2 more times. This code blinks over & over again, so I know it's trying to tell me something.
I'm not an electronics expert, but do know how to fix things. I am fine with doing something like removing the back panel and replacing the power supply board. I'd rather replace an entire... -
Re: New Members - please post your introductions here
HelloLeave a comment:
No activity results to display
Leave a comment: