Proscan 42LA45H PSU Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nwcs
    Badcaps Veteran
    • Dec 2015
    • 311
    • usa

    #41
    Re: Proscan 42LA45H PSU Problem

    let me correct that. I get all of the correct voltages except on which is 0v. This all happened after I replaced three bad caps in the power supply and was running a burn in test. Everything was fine until I turned unit off. I am pretty sure the main is the issue.

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 7961
      • Canada

      #42
      Re: Proscan 42LA45H PSU Problem

      so you have no backlight? main board is sending BLon, so if you have nothing there, then the main board is at fault.

      Comment

      • nwcs
        Badcaps Veteran
        • Dec 2015
        • 311
        • usa

        #43
        Re: Proscan 42LA45H PSU Problem

        That is kind of what I thought. Right before I turned the tv off there were raster lines in the video but not in the menu.

        Comment

        Working...