Samsung BN44-00194A power supply dead

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • london-freddie
    Badcaps Veteran
    • May 2015
    • 472
    • UK

    #1

    Samsung BN44-00194A power supply dead

    helping a friend with a dead Samsung PS42Q96HDX/XEU plasma tv
    Dead no sign of life at all
    Apparently just went off whilst watching tv

    Power board is BN44-00194A
    checked 4 fuses on power board all ok
    no voltages on any of the boards outputs
    Anyone had dealings with these power boards, or where do I start checking
    I know I can get a used board off ebay however I would like to have a go at fixing this board myself, with your help of course
    Attached Files
  • ammarben
    Senior Member
    • May 2013
    • 63
    • algeria

    #2
    Re: Samsung BN44-00194A power supply dead

    first you have to check STD_5V delivred by VIPER22A
    ICB801S and component around

    Comment

    • ammarben
      Senior Member
      • May 2013
      • 63
      • algeria

      #3
      Re: Samsung BN44-00194A power supply dead

      check for short diode DB401 SB560 and dont forget caps

      Comment

      • london-freddie
        Badcaps Veteran
        • May 2015
        • 472
        • UK

        #4
        Re: Samsung BN44-00194A power supply dead

        DB401 seems to be ok no short, what where is SB560 can not find it

        Comment

        • ammarben
          Senior Member
          • May 2013
          • 63
          • algeria

          #5
          Re: Samsung BN44-00194A power supply dead

          DB401 is SB560

          Comment

          • london-freddie
            Badcaps Veteran
            • May 2015
            • 472
            • UK

            #6
            Re: Samsung BN44-00194A power supply dead

            got that db401 is ok all caps look ok, 2 glass fuses in centre of board are good but no power at those fuses when power applied to board

            Comment

            • ammarben
              Senior Member
              • May 2013
              • 63
              • algeria

              #7
              Re: Samsung BN44-00194A power supply dead

              Comment

              • sordids999
                Badcaps Legend
                • May 2013
                • 2149
                • uk

                #8
                Re: Samsung BN44-00194A power supply dead

                https://www.badcaps.net/forum/showthread.php?t=46606

                might help you along the way

                Comment

                • london-freddie
                  Badcaps Veteran
                  • May 2015
                  • 472
                  • UK

                  #9
                  Re: Samsung BN44-00194A power supply dead

                  no 5v

                  Comment

                  • sordids999
                    Badcaps Legend
                    • May 2013
                    • 2149
                    • uk

                    #10
                    Re: Samsung BN44-00194A power supply dead

                    checked for cold solder joints ?

                    Comment

                    • budm
                      Badcaps Legend
                      • Feb 2010
                      • 40746
                      • USA

                      #11
                      Re: Samsung BN44-00194A power supply dead

                      What DCV do you get between the cap CB801?
                      Notes: the SCHEMATIC may not be 100% correct.
                      Attached Files
                      Never stop learning
                      Basic LCD TV and Monitor troubleshooting guides.
                      http://www.badcaps.net/forum/showthr...956#post305956

                      Voltage Regulator (LDO) testing:
                      http://www.badcaps.net/forum/showthr...999#post300999

                      Inverter testing using old CFL:
                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                      http://s807.photobucket.com/user/budm/library/

                      TV Factory reset codes listing:
                      http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment

                      • victor_cj
                        Senior Member
                        • May 2015
                        • 90
                        • Romania

                        #12
                        Re: Samsung BN44-00194A power supply dead

                        Check or replace RB806, ZDB803. I had this zener diode faulty.
                        The art of fighting without fighting

                        Comment

                        • london-freddie
                          Badcaps Veteran
                          • May 2015
                          • 472
                          • UK

                          #13
                          Re: Samsung BN44-00194A power supply dead

                          replaced power board with a used board tv powers up fine now, I call it fixed, however don't know what is wrong with original power board, thanks for the help guys

                          Comment

                          • budm
                            Badcaps Legend
                            • Feb 2010
                            • 40746
                            • USA

                            #14
                            Re: Samsung BN44-00194A power supply dead

                            Thanks for the follow-up.
                            Never stop learning
                            Basic LCD TV and Monitor troubleshooting guides.
                            http://www.badcaps.net/forum/showthr...956#post305956

                            Voltage Regulator (LDO) testing:
                            http://www.badcaps.net/forum/showthr...999#post300999

                            Inverter testing using old CFL:
                            http://www.badcaps.net/forum/showthr...er+testing+cfl

                            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                            http://s807.photobucket.com/user/budm/library/

                            TV Factory reset codes listing:
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            Related Topics

                            Collapse

                            • Tynan Dill
                              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                              by Tynan Dill
                              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                              Upon bringing it home and plugging it up, it showed a standby light.

                              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                              The screen seems to blackout and stay black, but with a flashlight I can see the display.

                              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                              Assuming...
                              11-22-2024, 01:46 PM
                            • sam_sam_sam
                              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                              by sam_sam_sam
                              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                              03-31-2024, 02:12 PM
                            • Andreas_de
                              Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
                              by Andreas_de
                              Hello!

                              i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
                              Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

                              Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
                              ...
                              04-12-2025, 10:38 AM
                            • kevin_allein
                              Samsung QE 75 Q 7 FGMTZG Power Supply dead
                              by kevin_allein
                              Hi, have this Samsung QE 75 Q 7 FGMTZG TV with no function. First analysis shows the power supply board is dead and fuse blown. Power Supply has the number BN94-11439A. I did short circuit test transistor and diodes and those do not appear to have shorts. I must admit I did not look at every single data sheet.
                              In the TV was some black dust residue, so probably one of the electrolytic caps blew, but they do not show short either.

                              Does anyone have schematics for that board ?
                              Any good tip, what could be the issue ?
                              02-27-2025, 12:15 PM
                            • sam_sam_sam
                              Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                              by sam_sam_sam
                              I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                              I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                              07-01-2024, 06:34 AM
                            • Loading...
                            • No more items.
                            Working...