17pw26-4 v.1 repair

[azza1234]

was replacing some caps on this board and it decided to fall of the side and broke the transformer off could I repair the transformer or is a replacement needed? im not to sure where the wires go has anyone got any ideas? the transformer is30060103 lse lse-b9 1005f3

[stj]

Re: 17pw26-4 v.1 repair

do you have the wires on the other side of that transformer?
if you do then it can be soldered down.

[azza1234]

Re: 17pw26-4 v.1 repair

yes have the other wires

[azza1234]

Re: 17pw26-4 v.1 repair

do the 2 wires go to 5 and the other go on the other 5

[stj]

Re: 17pw26-4 v.1 repair

5?
not all the holes are used.
look at the pads on the bottom.

[Alastair E]

Re: 17pw26-4 v.1 repair

Personally--I would bin that Tx and replace it complete--Seeing it looks as though its the PFC Boost Choke, and would be considered a 'Safety Component'......

Loads of these hideous POS PSU's around to pull one from!

[azza1234]

Re: 17pw26-4 v.1 repair

im planing on replacing it but cant find any suitable one's anywhere does any have one I could buy?

[sordids999]

Re: 17pw26-4 v.1 repair

have you tried Google,Ebay ?

[azza1234]

Re: 17pw26-4 v.1 repair

yer but cant seem to find any the same as this! is there an alternative?

[azza1234]

Re: 17pw26-4 v.1 repair

ive got a broken vestel 17pw25-4 250111 v1 will any of the transformers fit off this?

[tom66]

Re: 17pw26-4 v.1 repair

No

[azza1234]

Re: 17pw26-4 v.1 repair

ok will have to check in my old pc power supplys there might be one in there

[tom66]

Re: 17pw26-4 v.1 repair

No, there won't. It's a custom part. Transformers and PFC coils are almost always custom parts.

Trying to get another part to work on there is likely to result in tears/fire/electrocution.

[azza1234]

Re: 17pw26-4 v.1 repair

ok I will try find another board for parts