Announcement

Collapse
No announcement yet.

Plasma Ribbon cable damage

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Plasma Ribbon cable damage

    I found this when removing from a plasma tv. Is this repairable??

    Attached Files

    #2
    Re: Plasma Ribbon cable damage

    Since it's on the X-main side, probably... all electrodes are connected to one common point, so as long as most of the contact area is intact you should be OK.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Plasma Ribbon cable damage

      So the cable should be good as is?

      Comment


        #4
        Re: Plasma Ribbon cable damage

        Yes, provided you make sure the cable is seated well.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment


          #5
          Re: Plasma Ribbon cable damage

          Yes, Its a single connection so the split doesn't really matter

          Comment


            #6
            Re: Plasma Ribbon cable damage

            awesome thanks guys you rock. I have learned a lot from people on this board. I hope to be able to help newbies to "pay it forward"

            Comment

            Working...
            X