Not sure how to explain this so I uploaded pictures. Can anyone help? What could the issue be?
Attached Files
-
-
Re: Samsung UN32EH4003F Video Issue. Please help.
need more info. on symptoms, can't tell from those pics.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS. -
Re: Samsung UN32EH4003F Video Issue. Please help.
seems like the left side on the second pic is darker than the right side?Comment
-
Re: Samsung UN32EH4003F Video Issue. Please help.
hard to tell, I see the model number, but who knows what it is ummmm led, lcd, plasma???????????Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Samsung UN32EH4003F Video Issue. Please help.
LED and looks like a panel fault maybe ?Comment
-
Re: Samsung UN32EH4003F Video Issue. Please help.
Here is another picture with out the DVD player on. The issue is of course the center line or some what center. You can see it run up an down. The TV is an LED
Attached FilesComment
-
-
Re: Samsung UN32EH4003F Video Issue. Please help.
UPDATE: The TV does not have that discolored line in it when I unplug the main board. It lights up good and even all the way across the screen. Should I assume that the Main board is bad instead of the panel itself?Comment
-
Re: Samsung UN32EH4003F Video Issue. Please help.
not sure, heres a question, can you check these led panels by twisting the panel like the lcd panels?, if so could try that and see if anything changes on display, with all boards hooked up.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi,
I have confirmed that I have a mainboard problem.
I have tracked no hardware issued on board so might be a software dump required.
I have searched a bit but wasn't able to find anything for my screen:
Here are some more details:
Panel: cy-nn065hgev1h
Main: BN94-14180M P08F
Your help much appreciated!
... -
Hello,
I have a Samsung DM32D display.
When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.
Here’s what I have tried so far:- Disconnected the cable between the mainboard and the power supply → the backlight turns on.
- Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
- Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.
From these tests, I suspect the problem might be on the mainboard. Could anyone...Yesterday, 03:47 AM -
Hello,
I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.
I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
Comment